Re: [MM qmi-support] "Set Operating Mode" on shutdown and more..

[Marius Kotsbak <marius kotsbak gmail com>]

Den 30. aug. 2012 14:05, skrev Aleksander Morgado:
> On 08/30/2012 01:30 PM, Marius Kotsbak wrote:
> > For the Sierra MC7710, it also does not work:
> >
> > $ mmcli -m 0 --set-preferred-mode 4g --set-allowed-modes 4g
> >
> > That is also strange, as it is possible to set preference using custom
> > AT command AT!SELRAT (or maybe it is only allowed modes?). Are you sure
> > it is working?
> >
> > I also see that not all combinations work. 3g and 4g allowed are okay,
> > but not:
> >
> > --set-allowed-modes='3g|4g'
> > error: couldn't set allowed modes:
> > 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Unsupported:
> > Setting allowed modes is not supported by this device'
> >
> > Also this works:
> >
> > $ mmcli -m 0 --set-allowed-modes='2g|3g|4g'
> > successfully set allowed modes in the modem
> Are all these previous outputs from the Sierra MC7710?
>
> BTW, if you set only one value as allowed-mode, there's no need to set a
> preferred-mode.
>
> Cheers

Yes, but it seems like it works almost as the ZTE modem, both not able 
to set preference (the default preference is probably LTE->3G->2G).

--
Marius