Re: [MM qmi-support] "Set Operating Mode" on shutdown and more..

On 08/30/2012 01:30 PM, Marius Kotsbak wrote:
> For the Sierra MC7710, it also does not work:
> $ mmcli -m 0 --set-preferred-mode 4g --set-allowed-modes 4g
> That is also strange, as it is possible to set preference using custom
> AT command AT!SELRAT (or maybe it is only allowed modes?). Are you sure
> it is working?
> I also see that not all combinations work. 3g and 4g allowed are okay,
> but not:
> --set-allowed-modes='3g|4g'
> error: couldn't set allowed modes:
> 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Unsupported:
> Setting allowed modes is not supported by this device'
> Also this works:
> $ mmcli -m 0 --set-allowed-modes='2g|3g|4g'
> successfully set allowed modes in the modem

Are all these previous outputs from the Sierra MC7710?

BTW, if you set only one value as allowed-mode, there's no need to set a



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]