RE: How to add conduits after recompilation

[z w <wzx888 hotmail com>]

Hi Matt,

>> It works but sometimes gnome-pilot complains that visor driver is not
>> disabled.
>> So I put visor in the blacklist and use "usb:" for both Treos.
>> The two Treos work.
>> But no more gnome-pilot progress window appears. I can only see the
>> progression on my Treos.
> 
> I suspect this is another problem due to your install from source.
> Maybe this would be fixed by logging-in again?

Is there a safe way to have a clean install without manually compiling and installing Evolution ? 
I mean use OpenSUSE's rpms, and only gnome-pilot compiled manually.

>> 3) Sync of Memos is broken, neither "Synchronization" nor "Copy from
>> PDA" nor "Copy to PDA" work, same situation for both Treos.
>> 4) With Treo 680, when I disable all but Memo sync, only Memo sync
>> happens (but not works really).
> 
> This could be due to a problem with the address or datebook conduit
> 'crashing' the sync before the memo sync gets to run.  I don't know what
> you mean by "Memo sync happens (but not works really)".  You can get
> more info by running 'gpilotd' from a terminal window (kill running
> copies first).

When I said "Memo sync happens but not working", it's I saw Memo sync displayed on my Treo, but no data are synced at the end.

See gpilotd's log at the end of this message.
 
>> With Treo 650, on my Treo, it continues to show sync of Address, of
>> Datebook, etc. and it takes much more time.
> 
> Did you disable the address/datebook sync for the Treo650, or just the
> Treo680?  Remember, these settings are per-PDA.

I think that it's because there were still "Backup" set in the conduit. After disabling that, no sync is shown for these other datadases.

Thanks a lot for your help.

/usr/local/libexec/gpilotd --oaf-activate-iid=OAFIID:GNOME_Pilot_Daemon --oaf-ior-fd=36
gpilotd-Message: gnome-pilot 2.0.16 starting...
gpilotd-Message: compiled for pilot-link version 0.12.2
gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network] [Bluetooth] 
gpilotd-Message: Activating CORBA server
IOR: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
gpilotd-Message: bonobo_activation_active_server_register = 0
gpilotd-Message: Watching Cradle (usb:)
gpilotd-Message: Found 4766, 0001
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0502, 0736
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 091e, 0004
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 115e, f100
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 082d, 0100
gpilotd-Message: Using net FALSE
gpilotd-Message: Found 082d, 0200
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 082d, 0300
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0c88, 0021
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0001
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0002
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0003
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0020
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0031
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0040
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0050
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0060
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0061
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0070
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 0830, 0080
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 04e8, 8001
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 04e8, 6601
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0038
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0066
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0095
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 009a
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 00c9
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 00da
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 00e9
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0144
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 054c, 0169
gpilotd-Message: Using net TRUE
gpilotd-Message: Found 12ef, 0100
gpilotd-Message: Using net TRUE
gpilotd-Message: setting PILOTRATE=57600
gpilotd-Message: Device Cradle has 0 events
gpilotd-Message: Instantiating 1 conduits...
ememoconduit-Message: in memo's conduit_get_gpilot_conduit

gpilotd-Message: Instantiated 0 backup conduits, 0 file conduits, 1 other conduits
gpilotd-Message: HotSync button pressed, synchronizing PDA
gpilotd-Message: PDA ID is 1392, name is Treo650_fr, owner is ZXW
gpilotd-Message: Pilot has 0 entries in restore queue
gpilotd-Message: Pilot has 0 entries in conduit queue
ememoconduit-Message: ---------------------------------------------------------

ememoconduit-Message: pre_sync: Memo Conduit v.0.1.6
ememoconduit-Message: Memo Conduit v.0.1.6
ememoconduit-Message:   Using timezone: /softwarestudio.org/Tzfile/Asia/Beijing

(gpilotd:3832): gpilotd-WARNING **: Copy from PDA failed!
gpilotd-Message: Synchronization ended



_________________________________________________________________
Appelez vos amis de PC à PC -- C'EST GRATUIT
http://get.live.com/messenger/overview