Re: NM starts wpa_supplicant -dd although wpa_supplicant is already started??

["Ma Begaj" <derliebegott gmail com>]

Hi,

I don't see any IE bits, but this is the configuration which I use to
connect and it is correct:

network={
 ssid="Datentankstelle802.1X
 scan_ssid=1
 proto=WPA
 key_mgmt=IEEE802.1X
 eap=TTLS
 phase1="peaplabel=0"
 phase2="auth=MSCHAPV2"
 identity="username"
 password="password"
}

br and thanks

M.



2006/10/11, Dan Williams <dcbw redhat com>:
> On Wed, 2006-10-11 at 16:33 +0200, Ma Begaj wrote:
> > Hi and thanks for help.
> >
> > I am playing with NetworkManager all day long and google already found
> > your page.
> > There are 2 attachments in this email:
> >
> > 1. nm.log was created when I clicked on "Connect to Other Wireless
> > Network". I choosed WPA2 Enterprise, entered my identity and password
> > and click to connect.
> >
> > 2. nm1.log was created when I just clicked on my access point without
> > trying to configure anything.
> >
> > No succes in any of these tries. Hopefully, you can find something usefull.
>
> Your access point does not appear to be broadcasting its WPA or RSN
> Information Element, meaning that the access point is not using WPA.
>
> wpa_supplicant(8535): 0: 00:15:2b:34:51:c1 ssid='Datentankstelle802.1X' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
> wpa_supplicant(8535):    skip - no WPA/RSN IE
>
> Can you provide the output of 'iwlist eth0 scan' that describes the
> "Datentankstelle802.1X" access point?
>
> You should get something like this:
>
>           Cell 04 - Address: 00:XX:XX:XX:XX:XX
>                     ESSID:"foobar"
>                     Protocol:IEEE 802.11bg
>                     Mode:Master
>                     Channel:1
>                     Encryption key:on
>                     Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 9 Mb/s; 11 Mb/s
>                               6 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
>                               48 Mb/s; 54 Mb/s
>                     Quality=82/100  Signal level=-48 dBm
>                     IE: WPA Version 1
>                         Group Cipher : TKIP
>                         Pairwise Ciphers (2) : TKIP CCMP
>                         Authentication Suites (1) : PSK
>                     IE: IEEE 802.11i/WPA2 Version 1
>                         Group Cipher : TKIP
>                         Pairwise Ciphers (2) : TKIP CCMP
>                         Authentication Suites (1) : PSK
>                        Preauthentication Supported
>                     Extra: Last beacon: 220ms ago
>
> If you don't see bits for "IE:", the access point is not using WPA.
>
> Dan
>
> >
> > M.
> >
> >
> >
> >
> >
> >
> >
> > 2006/10/11, Darren Albers <dalbers gmail com>:
> > > I /think/ that NM supports PEAP with mschapv2, can you post an output
> > > from the logs when you connect (editing out the confidential
> > > information).
> > > Here is information on running NM in debug mode:
> > > http://live.gnome.org/DarrenAlbers/NetworkManagerFAQ#head-5307e30269224aac6f7a4e83dc4c5b49386e7825
> > >
> > >
> > >
> > > On 10/11/06, Ma Begaj <derliebegott gmail com> wrote:
> > > > As I can see on the list , this is an old "problem"... I disabled my
> > > > wpa_supplicant to avoid conflicts.
> > > >
> > > > But this makes NetworkManager unusefull. I am not able to connect to
> > > > any of of my WPA2 APs at work.
> > > >
> > > > how should I enter these options:
> > > >
> > > > key_mgmt=IEEE8021X
> > > > phase1="peaplabel=0"
> > > > phase2="auth=MSCHAPV2"
> > > >
> > > >
> > > > I tried with WPA2 Enterprise, but nothing happens ... It connected
> > > > only once with success. It is just connecting forever ... and asks my
> > > > for a password every 20 seconds ... and finally it connects to an
> > > > another access point without encryption. and I didn't want that.
> > > >
> > > > And if I try not to use wpa_supplicant.conf any more and use only
> > > > NetworkManager, how can I edit some saved connections? How can I
> > > > change username or some other saved data?
> > > >
> > > >
> > > > Any ideas ... I am really trying hard to use NetworkManager, but this
> > > > is frustrating.
> > > >
> > > > Thanks.
> > > >
> > > > M.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > 2006/10/11, Ma Begaj <derliebegott gmail com>:
> > > > > Hi,
> > > > >
> > > > > I am having a problem that NM starts wpa_supplicant on its own and
> > > > > ignores the fact that I have already started it. And than I have two
> > > > > wpa_supplicants running and the 1st one is being ignored.
> > > > >
> > > > > I start it wpa_supplicant with
> > > > >
> > > > > --w -B -ieth0 -Dwext -c/etc/wpa_supplicant
> > > > >
> > > > > and NM starts it with
> > > > >
> > > > > -dd -g /var/run/wpa_supplicant-global
> > > > >
> > > > >
> > > > > Can I somehow disable this? Or can I change start parameter for
> > > > > wpa_supplicant in NM?
> > > > >
> > > > > And how can I tell NM not to write its output in syslog? I can start
> > > > > it with "--no-daemon >/dev/ull 2>&1 &", but that's not a nice
> > > > > solution.
> > > > >
> > > > > Thanks a lot.
> > > > >
> > > > > M.
> > > > >
> > > > > --
> > > > >
> > > >
> > > >
> > > > --
> > > > Glauben heißt nicht wissen wollen, was wahr ist ... Nietzsche
> > > > _______________________________________________
> > > > NetworkManager-list mailing list
> > > > NetworkManager-list gnome org
> > > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > > >
> > > _______________________________________________
> > > NetworkManager-list mailing list
> > > NetworkManager-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > >
> >
> >
> > _______________________________________________
> > NetworkManager-list mailing list
> > NetworkManager-list gnome org
> > http://mail.gnome.org/mailman/listinfo/networkmanager-list


--
Glauben heißt nicht wissen wollen, was wahr ist ... Nietzsche