Adam C Powell IV wrote:
On Mon, 2007-08-27 at 17:03 -0400, Pete Holsberg wrote:
Adam C Powell IV wrote:
>>> I too could never get visor and /dev/ttyUSB* to work with my 700p, so I
>>> switched to libusb, which is faster.
>>>
>>> Try this, it works for me with a 700p on Debian etch:
>>> * find /lib/modules -name visor.ko -print
>>> * mv <that file> /root/ [if there's more than one, give them different names]
>>> * rmmod visor
>>> * <Remove pilot-applet from panel, if it's running>
>>> * apt-get update && apt-get install libusb libusb-dev
>>> * cp /usr/share/pilot-link/udev/60-libpisock.rules /etc/udev/rules.d/
>>> * /etc/init.d/udev restart
>>> * <Plug in Treo>
>>> * <Hit hotsync>
>>> * pilot-xfer -p usb: -l
>>>
OK, after correcting the above, I see
> linux [root] /root> pilot-xfer -p usb: -l
>
> Listening for incoming connection on usb:...
And eventually the TREO times out.
??
Hmm. Could be a couple of things.
- Try "lsmod"; does it include visor? If so, that's blocking
libusb from seeing the Treo.
Nope.
- Try "ps auwx | grep pilot"; if you see gpilotd anywhere in
there, kill it.
Not there.
- I find that timing is important: try syncing at the same time
as, and just before, and just after hitting Enter on the pilot-xfer
command, something might work.
JUST BEFORE, JUST BEFORE!!! :-) :-) And |just before" works with
jpilot!!! Thanks, 1E6!!!
|
