On Thu, 2007-08-23 at 17:49 -0400, Pete Holsberg wrote: > > Aug 23 17:46:15 linux kernel: [117701.459636] usb 2-1: USB > disconnect, > address 57 > Aug 23 17:46:15 linux kernel: [117701.459940] visor ttyUSB0: > Handspring > Visor / Palm OS converter now disconnected from ttyUSB0 > Aug 23 17:46:15 linux kernel: [117701.460038] visor ttyUSB1: > Handspring > Visor / Palm OS converter now disconnected from ttyUSB1 > Aug 23 17:46:15 linux kernel: [117701.460058] visor 2-1:1.0: device > disconnected > Aug 23 17:46:16 linux kernel: [117702.218275] usb 2-1: new full speed > USB device using uhci_hcd and address 58 > Aug 23 17:46:16 linux kernel: [117702.391552] usb 2-1: configuration > #1 > chosen from 1 choice > Aug 23 17:46:16 linux kernel: [117702.396452] visor 2-1:1.0: > Handspring > Visor / Palm OS converter detected > Aug 23 17:46:16 linux kernel: [117702.396839] usb 2-1: Handspring > Visor > / Palm OS converter now attached to ttyUSB0 > Aug 23 17:46:16 linux kernel: [117702.396954] usb 2-1: Handspring > Visor > / Palm OS converter now attached to ttyUSB1 The above snippet looks suspisciously like it connects, disconnects, then reconnects again... I wonder if this is Yet Aother Palm where they try to be sneaky with that "Drive Mode" garbage. Try this... disconnect your Palm, hit HotSync, count to 4, then connect the cable, and *THEN* launch your pilot-xfer or pilot-dlpsh command against either /dev/ttyUSB0 or /dev/ttyUSB1. You'll have to play around with both of them to figure out which one is the right port for your specific device and usb configuration. Also, make sure you're *NOT* using ehci_hcd for this; you have to use uhci_hcd or ohci_hcd, depending on your specific motherboard chipset. If this doesn't work, we'll probably have to play with your specific udev configuration. > When I then try > > pilot-dlpsh -p /dev/ttyUSB1 > > I get > > ERROR: Specify exactly one of -c or -i And what happens when you do as requested? "pilot-dlpsh --help" will provide you with explanations of both parameters. -- David A. Desrosiers desrod gnu-designs com setuid gmail com http://projects.plkr.org/ Skype...: 860-967-3820
Attachment:
signature.asc
Description: This is a digitally signed message part