Re: [Ekiga-list] Problems incoming calls.

[Damien Sandras <dsandras seconix com>]

Le dimanche 15 février 2009 à 00:38 +1000, Bas Driessen a écrit :
> On Sat, 2009-02-14 at 15:17 +0100, Damien Sandras wrote: 
> > Le dimanche 15 février 2009 à 00:07 +1000, Bas Driessen a écrit :
> > > On Sat, 2009-02-14 at 15:02 +0100, Damien Sandras wrote: 
> > > > Le samedi 14 février 2009 à 23:26 +1000, Bas Driessen a écrit :
> > > > > > 
> > > > > > Perhaps the NAT binding on the router is closed.
> > > > > > 
> > > > > > We send a 'probe' every 10 seconds to keep it alive. 
> > > > > > 
> > > > > > Perhaps you could try sending a probe every 3 seconds. To change this,
> > > > > > you can edit the following key :
> > > > > > /apps/ekiga/protocols/sip/binding_timeout
> > > > > > using gconftool or gconf-editor. 
> > > > > > 
> > > > > > Do not edit the config files manually, it won't work.
> > > > > 
> > > > > Thanks Damien. Tried that, but it did not work unfortunately.  Fedora
> > > > > release ekiga-3.0.2-2.fc10 update yesterday. Updated and also no
> > > > > change.
> > > > > 
> > > > > Is it possible that the problem is on the provider site? If so, which
> > > > > value/setting should I ask them to set/use?
> > > > > 
> > > > > Anything else in Ekiga I can set. Proxy for instance? Can I edit STUN
> > > > > settings in Ekiga? Any other ideas?
> > > > 
> > > > I think you should ask them. What you could do also is reconfigure Ekiga
> > > > so that the registration timeout is set to 120 (2 minutes). That way, it
> > > > will register every 2 minutes with your provider. It will hide the
> > > > problem.
> > > 
> > > I just tried before setting it to 30 seconds. Same problem. (The
> > > default is 60 btw, which is still faster than the 120 you suggest).
> > 
> > In that case, and if you are sure your modem is not the culprit, I
> > really suggest you to report a bug to your sip provider.
> 
> Thanks for your help Damien. As mentioned before, Twinkle (SIP client)
> works OK and is stable with the same VoIP account on the same machine
> here. That is what makes me believe that this is an Ekiga issue. Have
> tried it from my Fedora laptop as well. Same results. Too bad ...
> Ekiga is so much better than the other VoIP clients, so that is why I
> am really desperate to get it to work.

Are you using STUN in both cases?
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   Be IP           : http://www.beip.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras ekiga net