Ok sorry to bother again. I did some experiments and applied a patch which I mainly did to test if it will help something to not change the hostname. So here are again some results and the patch I applied. I have recompilled NM with the patch and then started it from the terminal. In the logs you can see what was going on. It seems that it starts dhclient and obtains the ip but it doesnt set it up correctly. Can somebody comment it ? Rgds Saxa
Apr 11 00:49:40 rc-samsung pulseaudio[3622]: module-alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Most likely this is an ALSA driver bug. Please report this issue to the PulseAudio developers. Apr 11 00:50:31 rc-samsung nm-dispatcher.action: nm_dispatcher_action: Invalid connection: '(null)' / 'connection setting not found' invalid: 1 Apr 11 00:51:02 rc-samsung NetworkManager: nm_ip4_config_add_nameserver: assertion `nameserver != s' failed Apr 11 00:51:02 rc-samsung NetworkManager: nm_ip4_config_add_nameserver: assertion `nameserver != s' failed Apr 11 00:52:45 rc-samsung pulseaudio[3622]: module-alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Most likely this is an ALSA driver bug. Please report this issue to the PulseAudio developers. Apr 11 00:52:51 rc-samsung NetworkManager: <WARN> nm_dhcp_manager_handle_event(): Received DHCP event from unexpected PID 4268 (expected 0) Apr 11 00:52:51 rc-samsung NetworkManager: <WARN> nm_dhcp_manager_handle_event(): Received DHCP event from unexpected PID 4279 (expected 0) Apr 11 00:53:00 rc-samsung pulseaudio[3622]: module-alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Most likely this is an ALSA driver bug. Please report this issue to the PulseAudio developers. Apr 11 00:53:24 rc-samsung NetworkManager: <WARN> impl_manager_activate_connection(): Connection (2) /org/freedesktop/NetworkManagerSettings/1 failed to activate: (2) Device not managed by NetworkManager Apr 11 00:53:24 rc-samsung pulseaudio[3622]: module-alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Most likely this is an ALSA driver bug. Please report this issue to the PulseAudio developers. Apr 11 00:53:39 rc-samsung last message repeated 2 times Apr 11 00:53:47 rc-samsung NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting down normally. Apr 11 00:53:47 rc-samsung pulseaudio[3622]: module-alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Most likely this is an ALSA driver bug. Please report this issue to the PulseAudio developers. Apr 11 00:54:10 rc-samsung last message repeated 2 times
diff --git a/src/backends/NetworkManagerSlackware.c b/src/backends/NetworkManagerSlackware.c
index 8d7c5bf..144be34 100644
--- a/src/backends/NetworkManagerSlackware.c
+++ b/src/backends/NetworkManagerSlackware.c
@@ -30,6 +30,8 @@
#include "NetworkManagerGeneric.h"
#include "NetworkManagerSystem.h"
+#include "NetworkManagerUtils.h"
+#include "nm-utils.h"
/*
* nm_system_enable_loopback
@@ -39,7 +41,10 @@
*/
void nm_system_enable_loopback (void)
{
- nm_generic_enable_loopback ();
+ if (g_file_test ("/etc/rc.d/rc.inet1", G_FILE_TEST_IS_EXECUTABLE)) {
+ nm_info ("Starting basic system networking.");
+ nm_spawn_process ("/etc/rc.d/rc.inet1");
+ }
}
@@ -52,6 +57,12 @@ void nm_system_enable_loopback (void)
*/
void nm_system_update_dns (void)
{
- /* I'm not running nscd */
+ /* If nscd runs, restart it. */
+ if (g_file_test("/var/run/nscd/nscd.pid", G_FILE_TEST_EXISTS)) {
+ nm_spawn_process ("/usr/sbin/nscd -K");
+ nm_spawn_process ("/usr/sbin/nscd");
+ }
}
+/* vim: noai:ts=4:sw=4
+ */
NetworkManager: <info> starting... NetworkManager: <info> Starting basic system networking. NetworkManager: <info> (eth0): new Ethernet device (driver: 'sky2') NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_13_77_af_1f_59 NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k_pci') NetworkManager: <info> (wlan0): exported as /org/freedesktop/Hal/devices/net_00_21_63_92_af_f6 NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> (eth0): carrier now ON (device state 1) NetworkManager: <info> (eth0): device state change: 1 -> 2 NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): deactivating device (reason: 2). NetworkManager: <info> Setting system hostname to 'localhost.localdomain' (no default device) NetworkManager: <info> (wlan0): device state change: 1 -> 2 NetworkManager: <info> (wlan0): preparing device. NetworkManager: <info> (wlan0): deactivating device (reason: 2). NetworkManager: <info> (eth0): device state change: 2 -> 3 NetworkManager: <info> (wlan0): device state change: 2 -> 3 NetworkManager: <info> Activation (eth0) starting connection 'office-italy' NetworkManager: <info> (eth0): device state change: 3 -> 4 NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (eth0): device state change: 4 -> 5 NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> (eth0): device state change: 5 -> 7 NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. NetworkManager: <info> dhcpcd started with pid 4268 NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. eth0: dhcpcd 4.0.12 starting NetworkManager: <info> DHCP: device eth0 state changed (null) -> preinit NetworkManager: <info> (wlan0): supplicant interface state: starting -> ready eth0: broadcasting for a lease eth0: offered 192.168.1.104 from 192.168.1.1 NetworkManager: <info> Activation (wlan0) starting connection 'rcdiostrouska' NetworkManager: <info> (wlan0): device state change: 3 -> 4 NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (wlan0): device state change: 4 -> 5 NetworkManager: <info> Activation (wlan0/wireless): access point 'rcdiostrouska' has security, but secrets are required. NetworkManager: <info> (wlan0): device state change: 5 -> 6 NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. eth0: acknowledged 192.168.1.104 from 192.168.1.1 eth0: checking 192.168.1.104 is available on attached networks NetworkManager: <info> (wlan0): supplicant connection state: scanning -> inactive eth0: leased 192.168.1.104 for 259200 seconds NetworkManager: <info> DHCP: device eth0 state changed preinit -> bound NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) started... NetworkManager: <info> address 192.168.1.104 NetworkManager: <info> prefix 24 (255.255.255.0) NetworkManager: <info> gateway 192.168.1.1 NetworkManager: <info> nameserver '192.168.1.1' NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... NetworkManager: <info> (eth0): device state change: 7 -> 8 NetworkManager: <info> Policy set 'office-italy' (eth0) as default for routing and DNS. NetworkManager: <info> Activation (eth0) successful, device activated. NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> (wlan0): device state change: 6 -> 4 NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (wlan0): device state change: 4 -> 5 NetworkManager: <info> Activation (wlan0/wireless): connection 'rcdiostrouska' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Config: added 'ssid' value 'rcdiostrouska' NetworkManager: <info> Config: added 'scan_ssid' value '1' NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' NetworkManager: <info> Config: added 'psk' value '<omitted>' NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> (wlan0): supplicant connection state: inactive -> scanning NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating NetworkManager: <info> (wlan0): supplicant connection state: associating -> associated NetworkManager: <info> (wlan0): supplicant connection state: associated -> 4-way handshake NetworkManager: <info> (wlan0): supplicant connection state: 4-way handshake -> group handshake NetworkManager: <info> (wlan0): supplicant connection state: group handshake -> completed NetworkManager: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'rcdiostrouska'. NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> (wlan0): device state change: 5 -> 7 NetworkManager: <info> Activation (wlan0) Beginning DHCP transaction. NetworkManager: <info> dhcpcd started with pid 4279 NetworkManager: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete. wlan0: dhcpcd 4.0.12 starting NetworkManager: <info> DHCP: device wlan0 state changed (null) -> preinit wlan0: broadcasting for a lease wlan0: offered 192.168.1.100 from 192.168.1.1 wlan0: acknowledged 192.168.1.100 from 192.168.1.1 wlan0: checking 192.168.1.100 is available on attached networks wlan0: leased 192.168.1.100 for 259200 seconds NetworkManager: <info> DHCP: device wlan0 state changed preinit -> bound NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP Configure Get) scheduled... NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP Configure Get) started... NetworkManager: <info> address 192.168.1.100 NetworkManager: <info> prefix 24 (255.255.255.0) NetworkManager: <info> gateway 192.168.1.1 NetworkManager: <info> nameserver '192.168.1.1' NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled... NetworkManager: <info> Activation (wlan0) Stage 4 of 5 (IP Configure Get) complete. NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... NetworkManager: nm_ip4_config_add_nameserver: assertion `nameserver != s' failed NetworkManager: nm_ip4_config_add_nameserver: assertion `nameserver != s' failed NetworkManager: <info> Policy set 'office-italy' (eth0) as default for routing and DNS. NetworkManager: <info> (wlan0): device state change: 7 -> 8 NetworkManager: <info> Activation (wlan0) successful, device activated. NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> Sleeping... NetworkManager: <info> (eth0): now unmanaged NetworkManager: <info> (eth0): device state change: 8 -> 1 NetworkManager: <info> (eth0): deactivating device (reason: 37). eth0: received SIGTERM, stopping NetworkManager: <info> eth0: canceled DHCP transaction, dhcp client pid 4268 NetworkManager: <info> Policy set 'rcdiostrouska' (wlan0) as default for routing and DNS. NetworkManager: <info> (eth0): cleaning up... NetworkManager: <info> (eth0): taking down device. NetworkManager: <info> (wlan0): now unmanaged NetworkManager: <info> (wlan0): device state change: 8 -> 1 NetworkManager: <info> (wlan0): deactivating device (reason: 37). wlan0: received SIGTERM, stopping NetworkManager: <info> wlan0: canceled DHCP transaction, dhcp client pid 4279 NetworkManager: <info> (wlan0): cleaning up... NetworkManager: <info> (wlan0): taking down device. NetworkManager: <info> (eth0): carrier now OFF (device state 1) NetworkManager: <WARN> nm_dhcp_manager_handle_event(): Received DHCP event from unexpected PID 4268 (expected 0) NetworkManager: <WARN> nm_dhcp_manager_handle_event(): Received DHCP event from unexpected PID 4279 (expected 0) NetworkManager: <WARN> impl_manager_activate_connection(): Connection (2) /org/freedesktop/NetworkManagerSettings/1 failed to activate: (2) Device not managed by NetworkManager
Attachment:
nm-wpasupplicant.log
Description: Binary data