Re: manual mode options

[Dan Williams <dcbw redhat com>]

On Sat, 2008-01-26 at 18:53 +0100, Fabio Segale wrote:
> I'm wrong the new kernel 2.6.24 DON'T contain the scan_capa patch I've
> to back-port manually. Can you give me the url of scan_capa patch I've
> find this one 
> 
> http://people.redhat.com/linville/kernels/rhel5/patches/jwltest-wext-scan-cap.patch
> 
> It's the right one

Thats Linville's backport to 2.6.18, you probably want:

http://git.kernel.org/?p=linux/kernel/git/linville/wireless-2.6.git;a=commitdiff_plain;h=f4317f3ba1f6d833bcf8ec22b5575b981b5438dc

And for the 0.6.x version of NM that your distro probably ships:

http://bigw.org/~dan/nm-scan-capa.patch

Dan

> Thnx again
> 
> 
> 
> Il giorno sab, 26/01/2008 alle 09.15 -0500, Dan Williams ha scritto:
> > On Sat, 2008-01-26 at 11:00 +0100, Fabio Segale wrote:
> > > Ok about patch I've understand. For the other question I try to explain
> > > with an example:
> > > 
> > > I've two network profile save in NM:
> > > 
> > > 1) called "roaming" with all interfaces in roaming mode and controlled
> > > by NM
> > > 
> > > 2) called "work" with the wireless interface in manual mode and with a
> > > statical address.
> > 
> > Right, this means NM is disabled.  Your distribution (probably Ubuntu?)
> > has chosen to disable NetworkManager when you choose manual.
> > 
> > > If I load" work" profile I see all the parameters (address, ssid,
> > > ecc...) that I have chose with NM in the file /etc/network/interface
> > > If I load the network profile "roaming" the file /etc/network/interface
> > > is blank (it's contain only loopback interface).
> > > Now if I return to the "work" profile in the /etc/network/interface I
> > > see again the parameters of the wireless interface. in the meantime were
> > > NM store this parameters?
> > 
> > Network details are stored in GConf when using Gnome.  But details like
> > ap_scan are things you never should have to see, and NM handles those
> > things internally.  Thus you need the kernel patch and a backport of the
> > NM patch to make what you want happen.
> > 
> > Dan
> > 
> > > thnx a lot Dan
> > > 
> > > 
> > > 
> > > 
> > > Il giorno ven, 25/01/2008 alle 22.28 -0500, Dan Williams ha scritto:
> > > > On Sat, 2008-01-26 at 00:01 +0100, Fabio Segale wrote:
> > > > > What I want if it's possible when in manual mode (or in roaming) the
> > > > > possibility of insert other option  like:
> > > > > 
> > > > > wpa-scan-ssid 1
> > > > > wpa-ap-scan 1 
> > > > > 
> > > > > and these additional options saved in the profile so when I switch from
> > > > > one profile an other I don't have to insert these options manually in
> > > > > the file /etc/network/interfaces (I use debian like distros)
> > > > > 
> > > > > A question, where is saved the configuration parameters of manual a
> > > > > profile in NM (see my previously post)
> > > > 
> > > > I'm not sure how Ubuntu (if that's what you use) has implemented manual
> > > > mode, but it may not even have anything to do with NM.  Ubuntu has
> > > > patched NM to completely ignore interfaces that have an entry
> > > > in /etc/network/interfaces.
> > > > 
> > > > If just plain Debian, the static config stuff is stored
> > > > in /etc/network/interfaces and read into NM when NM starts up.
> > > > 
> > > > But again, you really do want to get your distro to apply the kernel
> > > > scan_capa patch.  That fixes your problem and makes your hack
> > > > unecessary, because then NM is able to _automatically_ determine whether
> > > > ap_scan should be 2 or 1.
> > > > 
> > > > Dan
> > > > 
> > > > 
> > > > > thnx 
> > > > > 
> > > > >  
> > > > > Il giorno ven, 25/01/2008 alle 15.14 -0500, Dan Williams ha scritto:
> > > > > > On Fri, 2008-01-25 at 20:52 +0100, fabio segale tiscali it wrote:
> > > > > > > Hi 
> > > > > > > 
> > > > > > > At work I have a wireless network with static address  and wpa-psk
> > > > > > > protection but and don't broadcast the  ssid. So I've configured nm in
> > > > > > > manual mode to use the statical ip and save this profile/location but
> > > > > > > to work I'have to add manualy in the file /etc/network/interface the
> > > > > > > options wpa-scan-ssid 1!!
> > > > > > 
> > > > > > What you really want to do is get your distro to apply the "scan
> > > > > > capabilities" patch to their kernel, and then backport the NM scan
> > > > > > capabilities patch to your distro's NM version.
> > > > > > 
> > > > > > Dan
> > > > > > 
> > > > > > >  It's possible save this option in the profile/location of nm and
> > > > > > > where nm save/store the configuration of the manual profiles, I know
> > > > > > > that in roaming save the parameters in gconf  at
> > > > > > > system/networking/wireless/networks/SSID but where in manual mode???
> > > > > > > 
> > > > > > > thnx everyone
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > ____________________________________________________
> > > > > > > Tiscali.Fax: ricevi gratis sulla tua email e invii a 12 cent per
> > > > > > > pagina
> > > > > > > senza scatto alla risposta
> > > > > > > 
> > > > > > > _______________________________________________
> > > > > > > NetworkManager-list mailing list
> > > > > > > NetworkManager-list gnome org
> > > > > > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > > > > > 
> > > > > 
> > > > > _______________________________________________
> > > > > NetworkManager-list mailing list
> > > > > NetworkManager-list gnome org
> > > > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > > > 
> > > 
> > > _______________________________________________
> > > NetworkManager-list mailing list
> > > NetworkManager-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > 
> 
> _______________________________________________
> NetworkManager-list mailing list
> NetworkManager-list gnome org
> http://mail.gnome.org/mailman/listinfo/networkmanager-list