Re: manual mode options
- From: Fabio Segale <fabio segale tiscali it>
- To: networkmanager-list <networkmanager-list gnome org>
- Subject: Re: manual mode options
- Date: Sat, 26 Jan 2008 18:41:47 +0100
Ok now I've understand all things (you are right I use ubuntu).
I think that I can use the new kernel version 2.6.24 that include the
scan_capa patch and use the new 0.7 NM Am I right?
Thnx Dan
Il giorno sab, 26/01/2008 alle 09.15 -0500, Dan Williams ha scritto:
> On Sat, 2008-01-26 at 11:00 +0100, Fabio Segale wrote:
> > Ok about patch I've understand. For the other question I try to explain
> > with an example:
> >
> > I've two network profile save in NM:
> >
> > 1) called "roaming" with all interfaces in roaming mode and controlled
> > by NM
> >
> > 2) called "work" with the wireless interface in manual mode and with a
> > statical address.
>
> Right, this means NM is disabled. Your distribution (probably Ubuntu?)
> has chosen to disable NetworkManager when you choose manual.
>
> > If I load" work" profile I see all the parameters (address, ssid,
> > ecc...) that I have chose with NM in the file /etc/network/interface
> > If I load the network profile "roaming" the file /etc/network/interface
> > is blank (it's contain only loopback interface).
> > Now if I return to the "work" profile in the /etc/network/interface I
> > see again the parameters of the wireless interface. in the meantime were
> > NM store this parameters?
>
> Network details are stored in GConf when using Gnome. But details like
> ap_scan are things you never should have to see, and NM handles those
> things internally. Thus you need the kernel patch and a backport of the
> NM patch to make what you want happen.
>
> Dan
>
> > thnx a lot Dan
> >
> >
> >
> >
> > Il giorno ven, 25/01/2008 alle 22.28 -0500, Dan Williams ha scritto:
> > > On Sat, 2008-01-26 at 00:01 +0100, Fabio Segale wrote:
> > > > What I want if it's possible when in manual mode (or in roaming) the
> > > > possibility of insert other option like:
> > > >
> > > > wpa-scan-ssid 1
> > > > wpa-ap-scan 1
> > > >
> > > > and these additional options saved in the profile so when I switch from
> > > > one profile an other I don't have to insert these options manually in
> > > > the file /etc/network/interfaces (I use debian like distros)
> > > >
> > > > A question, where is saved the configuration parameters of manual a
> > > > profile in NM (see my previously post)
> > >
> > > I'm not sure how Ubuntu (if that's what you use) has implemented manual
> > > mode, but it may not even have anything to do with NM. Ubuntu has
> > > patched NM to completely ignore interfaces that have an entry
> > > in /etc/network/interfaces.
> > >
> > > If just plain Debian, the static config stuff is stored
> > > in /etc/network/interfaces and read into NM when NM starts up.
> > >
> > > But again, you really do want to get your distro to apply the kernel
> > > scan_capa patch. That fixes your problem and makes your hack
> > > unecessary, because then NM is able to _automatically_ determine whether
> > > ap_scan should be 2 or 1.
> > >
> > > Dan
> > >
> > >
> > > > thnx
> > > >
> > > >
> > > > Il giorno ven, 25/01/2008 alle 15.14 -0500, Dan Williams ha scritto:
> > > > > On Fri, 2008-01-25 at 20:52 +0100, fabio segale tiscali it wrote:
> > > > > > Hi
> > > > > >
> > > > > > At work I have a wireless network with static address and wpa-psk
> > > > > > protection but and don't broadcast the ssid. So I've configured nm in
> > > > > > manual mode to use the statical ip and save this profile/location but
> > > > > > to work I'have to add manualy in the file /etc/network/interface the
> > > > > > options wpa-scan-ssid 1!!
> > > > >
> > > > > What you really want to do is get your distro to apply the "scan
> > > > > capabilities" patch to their kernel, and then backport the NM scan
> > > > > capabilities patch to your distro's NM version.
> > > > >
> > > > > Dan
> > > > >
> > > > > > It's possible save this option in the profile/location of nm and
> > > > > > where nm save/store the configuration of the manual profiles, I know
> > > > > > that in roaming save the parameters in gconf at
> > > > > > system/networking/wireless/networks/SSID but where in manual mode???
> > > > > >
> > > > > > thnx everyone
> > > > > >
> > > > > >
> > > > > >
> > > > > > ____________________________________________________
> > > > > > Tiscali.Fax: ricevi gratis sulla tua email e invii a 12 cent per
> > > > > > pagina
> > > > > > senza scatto alla risposta
> > > > > >
> > > > > > _______________________________________________
> > > > > > NetworkManager-list mailing list
> > > > > > NetworkManager-list gnome org
> > > > > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > > > >
> > > >
> > > > _______________________________________________
> > > > NetworkManager-list mailing list
> > > > NetworkManager-list gnome org
> > > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > >
> >
> > _______________________________________________
> > NetworkManager-list mailing list
> > NetworkManager-list gnome org
> > http://mail.gnome.org/mailman/listinfo/networkmanager-list
>
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]