Re: [Ekiga-list] Sound not working with v3.0.1 and SuSE 11.1

[Damien Sandras <dsandras seconix com>]

What codec is being used for audio ?

Le lundi 12 janvier 2009 à 17:29 -0700, Joseph Comfort a écrit :
> Yes, I use H.323.  I have used it through many versions of gnomemeeting
> and into ekiga.  I know very little about SIP mainly because, when I
> start to read about it, it seems unsuitable for my needs.  I'd rather
> not learn, but instead use a standard that has always worked.
> 
> 
> Damien Sandras wrote:
> >> I can connect fine with H323 direct to the IP address of the MCU at the
> >> videoconference location.  Normally, if there is no one at the other
> >> end, I get a message about "You are the first participant."  I do not
> >> get that with the 11.1 system.  Video is being transmitted at a good
> >> rate (a default view as no webcam is attached).  But there is no sound
> >> transmission to or from the MCU.  I disabled pulseaudio by renaming the
> >> binary file (and rebooting).  I still had the system sounds, but no
> >> change with ekiga.
> >>
> >> Maybe the solution is easy, but I have not found it by trials, scanning
> >> mailing lists, etc.  Your help would be appreciated.
> > 
> > Using H.323 ?
> 
> Joe Comfort
> _______________________________________________
> ekiga-list mailing list
> ekiga-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-list
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   Be IP           : http://www.beip.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras ekiga net