Re: [Ekiga-list] Sound not working with v3.0.1 and SuSE 11.1

[Damien Sandras <dsandras seconix com>]

Le lundi 12 janvier 2009 à 14:15 -0700, Joseph Comfort a écrit :
> I have 3 computers with different architectures running SuSE 10.3.
> Ekiga v2.0.9 works fine on them.
> 
> I have 2 computers with different architectures running SuSE 11.1. The
> sound does not work with them.  Two computers, one from each group, have
> identical architectures.  They are both dual Opterons 244, with AMD8111
> audio chips.  The system sounds are heard fine.  The firewalls are off.
>  The kmix settings are the same.  The ekiga settings are the same.  I am
> using KDE 3.5 on both systems. I do not see any sound error messages in
> the system log files.
> 
> I can connect fine with H323 direct to the IP address of the MCU at the
> videoconference location.  Normally, if there is no one at the other
> end, I get a message about "You are the first participant."  I do not
> get that with the 11.1 system.  Video is being transmitted at a good
> rate (a default view as no webcam is attached).  But there is no sound
> transmission to or from the MCU.  I disabled pulseaudio by renaming the
> binary file (and rebooting).  I still had the system sounds, but no
> change with ekiga.
> 
> Maybe the solution is easy, but I have not found it by trials, scanning
> mailing lists, etc.  Your help would be appreciated.

Using H.323 ?
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   Be IP           : http://www.beip.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras ekiga net