Re: possible F13 build slave

[Piñeiro <apinheiro igalia com>]

From: Matthias Clasen <matthias clasen gmail com>
Subject: Re: possible F13 build slave
Date: Thu, 10 Jun 2010 15:24:46 -0400

> On Thu, Jun 10, 2010 at 5:19 AM, Piñeiro <apinheiro igalia com> wrote:
>> From: Matthias Clasen <matthias clasen gmail com>
>>
>>> i have an x86_64 machine running F13 here that I consider setting up
>>> as a build slave.
>>
>> Well, if you finally decide to do that, you have here [1] the howto.
>>
>> In brief, at the beginning you should configure both slave and master
>> in your own machine. Once it is working, it is just configure the
>> master on b.g.o to include your slave, and configure your slave to
>> connect to b.g.o master.
> 
> Maybe update that howto to say that you need to set up your own master first ?

You don't need to set your own master. It is just a general advice in
order to check that you have configure properly your slave, mainly for
people that require to configure from zero his jhbuild
environment. But it is true that this general advice is not included
on the howto.

> I wasn't aware of that, and it seems an unnecessary extra step. In
> particular, since the

Yes it is not mandatory.

> docs on that howto for master setup are severely lacking... I'll see
> if I can get that
> done, anyway.

"jhbuild bot --start-server" automatizes most of the work required.

>> Additionally, a good percentage of the modules should be compiling
>> properly. Frederic Peters proposed 80% or 2/3 in the past [2].
> 
> I'm pretty sure my last jhbuild run met that.

Ok, so as Frederic Peters said, you could try to go directly to the
slave part. 

BR

===
API (apinheiro igalia com)