Re: possible F13 build slave

[Matthias Clasen <matthias clasen gmail com>]

On Thu, Jun 10, 2010 at 5:19 AM, Piñeiro <apinheiro igalia com> wrote:
> From: Matthias Clasen <matthias clasen gmail com>
>
>> i have an x86_64 machine running F13 here that I consider setting up
>> as a build slave.
>
> Well, if you finally decide to do that, you have here [1] the howto.
>
> In brief, at the beginning you should configure both slave and master
> in your own machine. Once it is working, it is just configure the
> master on b.g.o to include your slave, and configure your slave to
> connect to b.g.o master.

Maybe update that howto to say that you need to set up your own master first ?
I wasn't aware of that, and it seems an unnecessary extra step. In
particular, since the
docs on that howto for master setup are severely lacking... I'll see
if I can get that
done, anyway.


> Additionally, a good percentage of the modules should be compiling
> properly. Frederic Peters proposed 80% or 2/3 in the past [2].

I'm pretty sure my last jhbuild run met that.