Hello,
How does audacious produce sound?
Are you sure it communicates to pulseaudio?
Do you also have pulse-audio-alsa installed?
Is your pulseaudio starting with your user X session via dbus activation or is it starting as soon as you are trying to play audio either by using speech-dispatcher or audacious?
Please try to understand what's going on and please try to avoid repeating the same thing over and over again. I'm sorry to say this but your arguments sound to me the way if you were about to say that someone else has broken that for you and your are demanding a fix without you doing nothing to help to figure it out.
Greetings
Peter
Dňa January 8, 2019 10:11:08 PM UTC používateľ "Arkadiusz Kozioł" <zywek-mailing nvps pl> napísal:
But sounds are playing, I've tested it with audacious etcetera.
Only speechd can not use pulse.
W dniu 08.01.2019 o 21:06, Peter Vágner
pisze:
Hello,
It should work like this on Arch linux.
* User starts orca.
* Orca uses python-speechd to communicate to user specific
speech-dispatcher instance. If speech-dispatcher is not yet
running, it will spawn it automagically.
* Speech-dispatcher will start and try to load either all
available output modules or those configured in either system-wide
config or user specific speech-dispatcher config.
* By default speech-dispatcher is configured to play TTS sound via
pulseaudio.
* As soon as speech-dispatcher has to produce audio it tries to
connect to the user session specific pulseaudio instance by using
libpulse. On Arch linux auto spawn is disabled in the pulseaudio
configuration however pulseaudio is inwoked via systemd socket
activation as soon as it's needed.
So if you still have issues you need to understand what I'm trying
to explain to you, poke at your system before starting orca,
identify your sound devices are working as they should, if yes
then find out if speech-dispatcher and pulseaudio are running
prior to starting orca, if they are already running, can they
produce sound, start orca, poke at your system again exploring
speech-dispatcher and pulseaudio processes and their logs taking
into account what we are talking about here.
Also this is all with the default arch linux configuration i.e. no
changes to speech-dispatcher and pulseaudio config files including
system-wide and user specific configs. If you have tweaked the
configs you need to take into account what you have tweaked in
there while troubleshooting all this.
I'm really sorry I can't really diagnose this for you as it is all
working fine for me on three different Arch linux installs I've
tried this on so far.
I will be installing Arch on a brand new machine in a few days, so
if I discover something usefull I will report it.
Greetings
Peter
Dňa January 8, 2019 9:42:00 AM UTC
používateľ Didier Spaier <didier slint fr> napísal:
This just means that either speech-dispatcher doesn't know where is the socket (the file to be accessed to 'talk' to pulseaudio), or is not allowed to access pulseaudio
There can be many reasons for that, but first please answer these already asked questions:
Which exact command do you type to start speech-dispatcher?
Why not just let Orca start speech-dispatcher which will then connect itself to pulseaudio (or to another sound server, depending of its settings)?
On 08/01/2019 09:11, Arkadiusz Kozioł wrote:
Just I wrote, that I have an error logs, that sd_espeak_ng or another can not connect to the pulse audio. WHat more do you need from me to try to help me?
W dniu 06.01.2019 o 20:09, Mallard pisze:
Thank you, Peter.
How can I get to the log, please?
Ciao,
Ollie
Il 06/01/2019 20:26, Peter Vágner via orca-list ha scritto:
Hello,
I'm sorry I really have no further suggestions without looking into the logs as I've tried to explain.
greetings
Peter
Dňa January 6, 2019 5:44:52 PM UTC používateľ "Arkadiusz Kozioł" <zywek-mailing nvps pl> napísal:
I have the newest version of espeak-ng from community repositoryy and I
can not use my Arch.
W dniu 03.01.2019 o 16:56, Peter Vágner pisze:
Hello, The issue with upgrading to speech-dispatcher 0.8.8-3
is that you should run up to date espeak-ng rather than espeak
or possibly out dated version of espeak-ng. Or have you
ensured you have up to date espeak-ng and the issue still
persists? Greetings Peter Dňa 2019-01-03 13:12 Arkadiusz
Kozioł napísal(a):
I'm using Archlinux, speech dispatcher 0.8.8-2 which it's
working, 0.8.8-3 not works, the newest version of
pulseaudio, sounds are playing, so pulse works, only
speechd can not connect to. W dniu 02.01.2019 o 20:30,
Austin Seraphin pisze:
Thanks Peter! I didn't realize that espeak-ng made it
into Community. Good! Installing espeak-ng and
updating speechd.conf fixed the problem and things
sound great. I think it might even act a little
snappier. On 1/1/19 10:37 AM, Peter Vágner wrote:
Hello, speech-dispatcher 0.8.8-3 and libspeechd
0.8.8-3 are just Arch linux specific rebuilds of the
package. There are no new upstream changes. Arch linux
specific change is that they officially require
espeak-ng instead of espeak. Is it possible you do
have some older version of eSpeak-ng installed from
the AUR that may cause incompatibility? If you wish to
live on bleeding edge, please reinstall espeak-ng-git
from the AUR, otherwise install espeak-ng from the
community repo. sudo pacman -S espeak-ng If this is
still not working for you, please look at the logs
reading one of these files depending on how you are
starting speech-dispatcher: /run/user/`id
-u`/speech-dispatcher/log/speech-dispatcher.log
~/.cache/speech-dispatcher/log/speech-dispatcher.log
Hopefully by doing this you can find out what is going
on on your system. For me this is all working great as
I'm running up to date espeak-ng-git. Greetings Peter
Dňa 1. 1. 2019 o 15:34 José Vilmar Estácio de Souza
napísal(a): I found exactly the same. On 12/31/18
11:30 PM, Austin Seraphin wrote: Hello. I decided to
upgrade my Arch Linux system for the year's end and
when I rebooted I found that Orca no longer worked.
The spd-say command didn't work either, so I narrowed
it down to speech-dispatcher. I noticed that this
upgrade did have a new version, 0.8.8-3. I downgraded
speech-dispatcher and libspeechd to 0.8.8-2 and
rebooted. The system worked. I wonder what has
changed. I wanted to alert everyone. -- Assinatura
Informal
orca-list mailing list orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list Orca
wiki: https://wiki.gnome.org/Projects/Orca Orca
documentation:
https://help.gnome.org/users/orca/stable/ GNOME
Universal Access guide:
https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at
http://bugzilla.gnome.org
-- Austin Seraphin: https://AustinSeraphin.com
orca-list mailing list orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list Orca
wiki: https://wiki.gnome.org/Projects/Orca Orca
documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide:
https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org
orca-list mailing list orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list Orca
wiki: https://wiki.gnome.org/Projects/Orca Orca
documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide:
https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki:https://wiki.gnome.org/Projects/Orca
Orca documentation:https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide:https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests athttp://bugzilla.gnome.org
--
Odoslané z môjho Android zariadenia prostredníctvom K-9 Mail. Prosím, ospravedlňte moju stručnosť.
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org
--
Odoslané z môjho Android zariadenia prostredníctvom K-9 Mail.
Prosím, ospravedlňte moju stručnosť.
--
Odoslané z môjho Android zariadenia prostredníctvom K-9 Mail. Prosím, ospravedlňte moju stručnosť. |
