Re: [orca-list] lag with Orca master

[Milton <milton duurzaamdigitaal org>]

Hi bittukumar

It works for me and right now I have Orca 3.29.4pre

Here are the steps for Ubuntu 18.04:

1. Open a terminal.

2. cd orca
3. git pull
4. PYTHON=/usr/bin/python3.6 ./autogen.sh
5. make
6. sudo make install


After press Alt+F2 and restart Orca with:

orca -r

Success

Milton


Op 08-07-18 om 20:02 schreef bittukumar jaiswal via orca-list:
> OK, just now I checked the previous mail so hear it is
> person's name: Milton
> thred's subject: Orca only read with arrow right in Firefox
> thanks.
>
> On 7/8/18, bittukumar jaiswal <bittukjaiswal gmail com> wrote:
> > Hello, joanie!
> > I did as you said above but nothing has happen, that I will check later.
> > yes you are right, the Orca master was not pre installed on my distro
> > that is  Ubuntu gnome. it is true that I am new user of orca, 2 weak
> > back I installed orca master on my laptop.
> > few days back I asked question regarding How to get orca master or? or
> > how to install Orca master? then I don't remember the proper name of
> > the person , any way that persson gide me with full step by step to
> > install orca master.
> > I hope I am clear to your question.
> > now after I give command in terminal: git pull it gave me an error.
> > fatal: not a git repository or any parent up to mount point /)
> > stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM NOT SET)
> > Now what to do? but last time when I was installing orca master I
> > didn't get such issue.
> > I am very much interested to test orca master and find the bugs in that.
> >
> >
> > On 7/7/18, Joanmarie Diggs <jdiggs igalia com> wrote:
> > > Hi Bittukumar.
> > >
> > > The short answer is you type "git pull" in the top-level source
> > > directory. Then build it like you did before. If this makes sense, feel
> > > free to stop reading. :)
> > >
> > > I'm afraid I'm confused by a couple of things you said. In particular,
> > > in your opening message you said "since I have started using Orca
> > > master, I have seen lag in places like launching application menu." From
> > > your words, I took it to mean you were using Orca master. But just now
> > > you said "I have another question that how to pull Orca master." So if
> > > you'll forgive my asking you a silly question, where did you get "Orca
> > > master" from originally?
> > >
> > > Assuming you got it by cloning it from GNOME's git repository, as I
> > > stated above, you should just do "git pull" in the top level source
> > > directory and then build it like you did before. If you got it along
> > > with your distro (e.g. Ubuntu), are you sure you are using Orca master?
> > > Most distros only provide stable releases of Orca in the stable version
> > > of their distro, and unstable releases of Orca in the unstable version
> > > of their distro. Arch is an exception to this rule. I don't think Ubuntu
> > > is.
> > >
> > > You can check the version of Orca you are using by doing "orca -v" in a
> > > terminal. When I do this using Orca master, I currently get "3.29.4pre."
> > > What do you get?
> > >
> > > --joanie
> > >
> > > On 07/07/2018 01:05 PM, bittukumar jaiswal wrote:
> > > > Hello, first of all so sorry that I've forget to CC the list.
> > > > I restarted the gnome shell, still there is lag but less then last time.
> > > > thanks.
> > > > sorry but I have another question that how to pull Orca master. let me
> > > > tell that, I am new user for orca master. I always love to test the
> > > > applications for accessibility.
> > > > after updating orca I'll check thanks.
> > > >
> > > > On 7/7/18, Joanmarie Diggs <jdiggs igalia com> wrote:
> > > > > (Please remember to CC the list. I've done so here in case others are
> > > > > interested in the discussion.)
> > > > >
> > > > > In answer to your question regarding how to restart gnome-shell, press
> > > > > Alt+F2 and in the resulting dialog to enter a command, type the letter
> > > > > r
> > > > > and press return.
> > > > >
> > > > > Also please pull Orca master as I've just added a work-around for one
> > > > > performance issue with gnome-shell. It hopefully will make things suck
> > > > > a
> > > > > bit less. That said, I do occasionally see the lag you describe, but
> > > > > only on a machine where I rarely log out or reboot (instead suspending
> > > > > at the end of each day). I think gnome-shell is creating a ton of
> > > > > redundant/duplicate objects and Orca doesn't know all these objects are
> > > > > bogus.... I'm still trying to debug that issue so I can file a bug
> > > > > against gnome-shell, but if I restart gnome-shell as described above,
> > > > > the problem goes away.
> > > > >
> > > > > Let me know what you find. Thanks!
> > > > > --joanie
> > > > >
> > > > > On 07/07/2018 10:03 AM, bittukumar jaiswal wrote:
> > > > > > sorry but how to do that?
> > > > > > I forgot to mention my desktop.
> > > > > > it is  Ubuntu 18.04 with gnome shell.
> > > > > > thanks
> > > > > >
> > > > > > On 7/7/18, Joanmarie Diggs <jdiggs igalia com> wrote:
> > > > > > > If you quit and restart gnome-shell does the lag problem go away?
> > > > > > > --joanie
> > > > > > >
> > > > > > > On 07/07/2018 07:22 AM, bittukumar jaiswal via orca-list wrote:
> > > > > > > > Hello, all!
> > > > > > > > since I have started using Orca master, I have seen lag in places
> > > > > > > > like
> > > > > > > > launching application menu. it takes lot of time to speak whatever
> > > > > > > > appearing on the screen. If I press super+A to launch Application
> > > > > > > > menu, I have to wait for minimum 5 to 10 seconds. If I am pressing
> > > > > > > > Tab
> > > > > > > > or any navigation key to reach to particular application then also
> > > > > > > > it
> > > > > > > > do not speak the name of any app,
> > > > > > > > I hope that you have understand what I want to say.
> > > > > > > > please take look at this.
> >
> > --
> > Best regards
> > Bittukumar Jaiswal
> > Computer instructor & trainer
> > Deep stambh foundation
> > E-Mail ID: bittukjaiswal gmail com