GNOME.org
 

Re: [orca-list] [Testers wanted before the official release] Slint64-4.2.1 release candidate is accessible.

I found nmtui works better and is how I got my wifi network up and running. 
On Tue, 17 Oct 2017, Didier Spaier wrote:


Date: Tue, 17 Oct 2017 17:58:10
From: Didier Spaier <didier slint fr>
To: orca-list <orca-list gnome org>
Subject: Re: [orca-list] [Testers wanted before the official release]
    Slint64-4.2.1 release candidate is accessible.

Hello David,

Le 17/10/2017 ? 23:24, David Hunt a ?crit?:
I didn't see a way to control what desktops got installed; got them all, it looks like. 

Yes, see my answer to Peter


 I think I'll remove the ones I don't want.


I think I'll remove the ones I don't want.

Seriously having. software that you don't use don't hurt in any way.
You will only free a few MB on your hard disk or SSD. 
Thanks for offering the Network Manager option at install time! Once my graphical setup got running, I 
exercised this option and setup my wifi in the connections editor, since the lx panel and dashboard are still 
inaccessible.? For those wanting to setup network manager outside the gui session, I think there is a tool 
called nmcli or nmtui?


Both nmtui and nmcli are provided as well as nmtui-connect, nmtui-edit and nm-tui hostname, 
nmconnection-editor and nm-online.


Using the default lxde, I find no way to switch among the windows for the running applications.? Using 
'alt+tab' seems to take focus from the top application window, but does not seem to focus a new window.? 
Pressing any key returns focus to the window from which I meant to move.? If I'm reading this correctly, fvwm 
is the window manager for the default gui session?? Is there another key to use?
Assuming that you have several windows opened, in LXDE with fvwm you need to press 'alt+tab' at least twice to focus to another window. 
Cheers,
Didier




On 10/17/2017 04:42 PM, Peter V?gner wrote:

Hello,

I have booted the iso image in qemu.
The initial boot process as well as the text based setup are both very intuitive and perfectly useable with 
speakup.
Have I skipped accidentally some parts of the setup process or is the setup script installing all the desktop 
environments? e.g. lxde, kde and I think xfce got all installed for me.
I will have to redo the install or tinker with it a bit more manually as the setup script failed to install 
lilo boot loader for me. I think that is because I am running all this inside qemu with virtio support turned 
on. My root partition is /dev/vda1 however lilo is insisting on /dev/sda1 as the root. The same goes for boot 
loader install. I wish it to be installed to MBR (/dev/vda) however it's attempted to get installed into 
/dev/sda. I will have to disable virtio and try one more time. Just out of interest. Is there a way to 
install grub instead of lilo?

I will test more tommorow. Hopefully I will manage to test out graphical environments by that time.

Thanks and greetings

Peter


2017-10-17 22:27 GMT+02:00 Didier Spaier <didier slint fr <mailto:didier slint fr>>:

??? Hello,

??? Le 17/10/2017 ? 21:04, Peter V?gner a ?crit :> The links to the
??? readme and accessibility related hints should be
??? > http://slackware.uk/slint/x86_64/slint-testing/iso/README
??? <http://slackware.uk/slint/x86_64/slint-testing/iso/README>
??? > http://slackware.uk/slint/x86_64/slint-testing/iso/ACCESSIBILITY
??? <http://slackware.uk/slint/x86_64/slint-testing/iso/ACCESSIBILITY>
??? That's right, thanks for the heads up and sorry for the bad links.


??? > I am going to do more testing now however eventhough I have read
??? the linked
??? > material and wiki pages at slint.fr <http://slint.fr> I am still
??? a bit confused on how to
??? > install this with speech with no braille display connected.
??? > Assuming I would like to install in english can I just boot off
??? the iso
??? > image, press the enter key and wait for the speech to activate?
??? Yes: speech and braille are both activated by default in the
??? installer.
??? The first thing you should hear is this message:
??? cut here
??? This installer has speech and Braille device support in order to be
??? accessible to visually impaired users. To have speech turned on during
??? installation type S, then press [Enter]. Else, just press Enter.
??? cut here

??? > In the readme we are advised not to start graphical interface on
??? boot when
??? > targetting accessibility but stay in the terminal. Does this
??? also apply for
??? > the first boot while about to install?The installer is text only.

??? > How do you handle accessibility when running lightweight
??? environments such
??? > as fluxbox, blackbox Fvwm, WindowMaker?All graphical
??? environments have a panel with an application menu
??? to which you can give the focus pressing? Alt+F1. This is lxpanel, but
??? in XFCE, and in MATE if you install it.

??? > Is PCManFM configured to provide the desktop?In LXDE only.

??? > When starting menu / pannel / run dialog with the provided keyboard
??? > shortcuts are there the same apps launched from within each
??? desktop or how
??? > did you manage to provide good level of accessibility in all
??? these cases?
??? Application menus are the same in all lightweight environments
??? (the one
??? plugged in lxpanel, and is accessible, as well as the application menu
??? in the panels of XFCE, and MATE if yu sintall it, (see below).

??? The run dialog I use in lightweight environments is xfrun4, which is
??? accessible, as well as the run dialog of MATE.

??? I don't think that the icons in the panel, including the
??? notification area
??? be accessible.

??? All logout dials used (mostly lxlogout and wm-logout) are accessible.

??? > When pressing alt+tab to switch windows does orca report the window
??? > switching to, i.e. do I know which window I am switching to
??? before the
??? > actual switch is performed? So I can switch to my window of
??? choice without
??? > cycling over all of currently opened windows until the one I wish to
??? > activate gains the focus.Alas, no.
??? This is possible in MATE though, that you can install with these
??? commands typed as root:
??? slapt-get -u
??? slapt-get --install-set mate

??? However as MATE comes from a Salix repo you will need to insert as
??? root
??? the code snippet /usr/share/orca/orca.snip
??? just after this line:
??? # Start the window manager:in /etc/X11/xinit/xinitrc.mate
??? I will automatize that before the official release.

??? > You have mentioned that the control center is not yet accessible
??? because
??? > that's a QT4 app. To certain extend QT4 apps can be accessed
??? with orca when
??? > qt-at-spi is installed alongside QT 4.8 or are there
??? accessibility issues
??? > beyond the QT4 accessibility support as provided by the qt-at-spi?

??? I tried to install qt-at-spi alongside qt-4.8.7 that is shipped in
??? Slint, to no avail.

??? > I apologise for a lot of questions even before trying the distro
??? however
??? > the fact main stream project aims such level of accessibility
??? sounds very
??? > exciting to me. Given the fact the distro appears to be oriented on
??? > lightweight software it should run great with awesome
??? performance too. And
??? > that is one more reason to make some good use of it.

??? You have no reason to apologize. On the contrary I am thankful for
??? your
??? questions, that hopefully can lead to enhancements.

??? Greetings,

??? Didier





_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org




_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
Log bugs and feature requests at http://bugzilla.gnome.org


--
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]