Re: [orca-list] Resp.: Resp.: Successfully using gnome and orca

["Juan Hernandez" <juan netplus1 com>]

Let me know what happends. 

-----Original Message-----
From: Marlon Brandão de Sousa [mailto:splyt lists gmail com] 
Sent: Thursday, July 26, 2007 11:24 AM
To: Janina Sajka
Cc: Juan Hernandez; Scott Haeger; orca-list gnome org; Speakup is a screen
review system for Linux.
Subject: Resp.: Resp.: [orca-list] Successfully using gnome and orca

Hello,
I still think that the guys on x project and speackupmodified.org should
know this and provide a int on what needs to be done to fix it.
I myself was planning to use a runlevel different than five, because I will
most likely use the console only. I don't have why to wait all the gui
startup everytime I boot my machine only because startx isn't working as it
was expected to.
Anyways I am about to install moonshine and I myself will report this issue
if I get it as soon as I have all it installed.
Marlon

2007/7/26, Janina Sajka <janina rednote net>:
> Thanks, Juan. Glad to hear you've got things working.
>
>
> I think one should always use runlevel 5. I doubt anyone is even 
> debugging startx. Certainly, most users would be in runlevel 5, so 
> that's where all the attention goes.
>
> Doesn't help me on my one trouble machine, though! <grin>
>
> Juan Hernandez writes:
> >     I have an update on this problem.
> >
> > I thought to see what would happen if I changed my run level to 5, 
> > to boot directly into the gui.  I did this, and it works 
> > beautifully.  Orca runs great, and gnome works great to.
> >
> > So, I don't know what this means.
> >
> > Thanks.
> >
> >
> >
> > -----Original Message-----
> > From: Marlon Brandão de Sousa [mailto:splyt lists gmail com]
> > Sent: Thursday, July 26, 2007 6:13 AM
> > To: Juan Hernandez
> > Cc: Scott Haeger; orca-list gnome org
> > Subject: Resp.: [orca-list] Successfully using gnome and orca
> >
> > Hello,
> > trying to report this issue to the speakupmodified project would be 
> > a good idea. Also it would help asking on a x project list could help.
> > Reading the logs I suspect that some component pre installed is 
> > broken, as the x server is aparentely having trouble to go up. Or 
> > perhaps it is a missing configuration. Are you trying to start x as
root?
> > Marlon
> >
> > 2007/7/25, Juan Hernandez <juan netplus1 com>:
> > > Well.
> > >
> > > 1.  I fully installed fc7 from the dvd provided off the 
> > > speakupmodified website 2.  I installed my synth, TTSynth 3.  I 
> > > did orca -t to configure orca via console, and it successfully 
> > > found my synth, and went through the prompts for me.
> > >
> > > I then tried to launch x and gnome, I typed at my prompt xinit
> > >
> > > And I get nothing.  I get the following output, depending on when 
> > > I use startx or xinit I get different outputs.
> > >
> > > Below are is my script session.
> > >
> > > Thx.
> > >
> > > (xion)-<~> ->xinit
> > > X Window System Version 1.3.0
> > > Release Date: 19 April 2007
> > > X Protocol Version 11, Revision 0, Release 1.3 Build Operating System:
> > > Fedora Core 7 Red Hat, Inc.
> > > Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP 
> > > Thu Jun 14
> > > 05:35:26 UTC 2007 i686
> > > Build Date: 11 June 2007
> > > Build ID: xorg-x11-server 1.3.0.0-9.fc7
> > >   Before reporting problems, check http://wiki.x.org
> > >   to make sure that you have the latest version.
> > > Module Loader present
> > > Markers: (--) probed, (**) from config file, (==) default setting,
> > >   (++) from command line, (!!) notice, (II) informational,
> > >   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:28:55 
> > > 2007
> > > (==) Using config file: "/etc/X11/xorg.conf"
> > > (II) Module already built-in
> > > (II) Module already built-in
> > >
> > > waiting for X server to shut down xterm:  fatal IO error 32 
> > > (Broken
> > > pipe) or KillClient on X server ":0.0"
> > > FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.
> > >
> > >
> > > xinit:  unexpected signal 2.
> > > (xion)-<~> ->
> > > (xion)-<~> ->startx
> > > xauth:  creating new authority file /root/.serverauth.30838
> > >
> > > X Window System Version 1.3.0
> > > Release Date: 19 April 2007
> > > X Protocol Version 11, Revision 0, Release 1.3 Build Operating System:
> > > Fedora Core 7 Red Hat, Inc.
> > > Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP 
> > > Thu Jun 14
> > > 05:35:26 UTC 2007 i686
> > > Build Date: 11 June 2007
> > > Build ID: xorg-x11-server 1.3.0.0-9.fc7
> > >   Before reporting problems, check http://wiki.x.org
> > >   to make sure that you have the latest version.
> > > Module Loader present
> > > Markers: (--) probed, (**) from config file, (==) default setting,
> > >   (++) from command line, (!!) notice, (II) informational,
> > >   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:30:03 
> > > 2007
> > > (==) Using config file: "/etc/X11/xorg.conf"
> > >
> > > (II) Module already built-in
> > > (II) Module already built-in
> > > localuser:root being added to access control list 
> > > v[0]='/usr/libexec/at-spi-registryd'
> > > s='/usr/libexec/at-spi-registryd'
> > > bar 1 '/usr/libexec/at-spi-registryd'
> > > Xlib:  extension "XEVIE" missing on display ":0.0".
> > >
> > > (gnome-session:30863): GLib-CRITICAL **: g_source_remove: 
> > > assertion `tag > 0' failed Bonobo accessibility support 
> > > initialized GTK Accessibility Module initialized
> > > SESSION_MANAGER=local/xion:/tmp/.ICE-unix/30863
> > > GTK Accessibility Module initialized GTK Accessibility Module 
> > > initialized Bonobo accessibility support initialized Bonobo 
> > > accessibility support initialized GTK Accessibility Module 
> > > initialized GTK Accessibility Module initialized Bonobo 
> > > accessibility support initialized GTK Accessibility Module 
> > > initialized GTK Accessibility Module initialized GTK Accessibility 
> > > Module initialized Bonobo accessibility support initialized GTK 
> > > Accessibility Module initialized GTK Accessibility Module 
> > > initialized GTK Accessibility Module initialized Bonobo 
> > > accessibility support initialized Bonobo accessibility support 
> > > initialized Bonobo accessibility support initialized GTK 
> > > Accessibility Module initialized GTK Accessibility Module 
> > > initialized
> > >
> > > ** (gnome-panel:30950): WARNING **: Failed to establish a 
> > > connection with
> > > GDM: No such file or directory
> > > (II) Module already built-in
> > >
> > > waiting for X server to shut down ....
> > >
> > > xinit:  unexpected signal 2.
> > > (xion)-<~> ->
> > >
> > >
> > > -----Original Message-----
> > > From: Scott Haeger [mailto:scott bashautomation com]
> > > Sent: Wednesday, July 25, 2007 11:14 AM
> > > To: Juan Hernandez
> > > Subject: Re: [orca-list] Successfully using gnome and orca
> > >
> > > Juan Hernandez wrote:
> > > > Hi guys, I just installed fedora 7 on to computers, a desktop 
> > > > and
> > laptop.
> > > > I cannot start xwindows+gnome+orca at all.
> > > >
> > > > Have you guys had any success with this?
> > > >
> > > > Please let me know, as I've been down for a day...
> > > >
> > > >
> > > > _______________________________________________
> > > > Orca-list mailing list
> > > > Orca-list gnome org
> > > > http://mail.gnome.org/mailman/listinfo/orca-list
> > > > Visit http://live.gnome.org/Orca for more information on Orca
> > > How far have you gotten on the installation? The first step is to 
> > > get Gnome running. That should be an easy install with FC7. We'll 
> > > guide you from there.
> > >
> > > Scott
> > >
> > > _______________________________________________
> > > Orca-list mailing list
> > > Orca-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/orca-list
> > > Visit http://live.gnome.org/Orca for more information on Orca
>
> --
>
> Janina Sajka, Phone:  +1.202.595.7777;        sip:janina a11y org
> Partner, Capital Accessibility LLC    http://CapitalAccessibility.Com
>
> Marketing the Owasys 22C talking screenless cell phone in the U.S. and 
> Canada Learn more at http://ScreenlessPhone.Com
>
> Chair, Open Accessibility     janina a11y org 
> Linux Foundation              http://a11y.org