GNOME.org
 

[orca-list] Resp.: Resp.: Successfully using gnome and orca

Hello,
I still think that the guys on x project and speackupmodified.org
should know this and provide a int on what needs to be done to fix it.
I myself was planning to use a runlevel different than five, because I
will most likely use the console only. I don't have why to wait all
the gui startup everytime I boot my machine only because startx isn't
working as it was expected to.
Anyways I am about to install moonshine and I myself will report this
issue if I get it as soon as I have all it installed.
Marlon

2007/7/26, Janina Sajka <janina rednote net>:

Thanks, Juan. Glad to hear you've got things working.


I think one should always use runlevel 5. I doubt anyone is even
debugging startx. Certainly, most users would be in runlevel 5, so
that's where all the attention goes.

Doesn't help me on my one trouble machine, though! <grin>

Juan Hernandez writes:
>    I have an update on this problem.
>
> I thought to see what would happen if I changed my run level to 5, to boot
> directly into the gui.  I did this, and it works beautifully.  Orca runs
> great, and gnome works great to.
>
> So, I don't know what this means.
>
> Thanks.
>
>
>
> -----Original Message-----
> From: Marlon Brandão de Sousa [mailto:splyt lists gmail com]
> Sent: Thursday, July 26, 2007 6:13 AM
> To: Juan Hernandez
> Cc: Scott Haeger; orca-list gnome org
> Subject: Resp.: [orca-list] Successfully using gnome and orca
>
> Hello,
> trying to report this issue to the speakupmodified project would be a good
> idea. Also it would help asking on a x project list could help.
> Reading the logs I suspect that some component pre installed is broken, as
> the x server is aparentely having trouble to go up. Or perhaps it is a
> missing configuration. Are you trying to start x as root?
> Marlon
>
> 2007/7/25, Juan Hernandez <juan netplus1 com>:
> > Well.
> >
> > 1.  I fully installed fc7 from the dvd provided off the
> > speakupmodified website 2.  I installed my synth, TTSynth 3.  I did
> > orca -t to configure orca via console, and it successfully found my
> > synth, and went through the prompts for me.
> >
> > I then tried to launch x and gnome, I typed at my prompt xinit
> >
> > And I get nothing.  I get the following output, depending on when I
> > use startx or xinit I get different outputs.
> >
> > Below are is my script session.
> >
> > Thx.
> >
> > (xion)-<~> ->xinit
> > X Window System Version 1.3.0
> > Release Date: 19 April 2007
> > X Protocol Version 11, Revision 0, Release 1.3 Build Operating System:
> > Fedora Core 7 Red Hat, Inc.
> > Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu
> > Jun 14
> > 05:35:26 UTC 2007 i686
> > Build Date: 11 June 2007
> > Build ID: xorg-x11-server 1.3.0.0-9.fc7
> >       Before reporting problems, check http://wiki.x.org
> >       to make sure that you have the latest version.
> > Module Loader present
> > Markers: (--) probed, (**) from config file, (==) default setting,
> >       (++) from command line, (!!) notice, (II) informational,
> >       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:28:55 2007
> > (==) Using config file: "/etc/X11/xorg.conf"
> > (II) Module already built-in
> > (II) Module already built-in
> >
> > waiting for X server to shut down xterm:  fatal IO error 32 (Broken
> > pipe) or KillClient on X server ":0.0"
> > FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.
> >
> >
> > xinit:  unexpected signal 2.
> > (xion)-<~> ->
> > (xion)-<~> ->startx
> > xauth:  creating new authority file /root/.serverauth.30838
> >
> > X Window System Version 1.3.0
> > Release Date: 19 April 2007
> > X Protocol Version 11, Revision 0, Release 1.3 Build Operating System:
> > Fedora Core 7 Red Hat, Inc.
> > Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu
> > Jun 14
> > 05:35:26 UTC 2007 i686
> > Build Date: 11 June 2007
> > Build ID: xorg-x11-server 1.3.0.0-9.fc7
> >       Before reporting problems, check http://wiki.x.org
> >       to make sure that you have the latest version.
> > Module Loader present
> > Markers: (--) probed, (**) from config file, (==) default setting,
> >       (++) from command line, (!!) notice, (II) informational,
> >       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:30:03 2007
> > (==) Using config file: "/etc/X11/xorg.conf"
> >
> > (II) Module already built-in
> > (II) Module already built-in
> > localuser:root being added to access control list
> > v[0]='/usr/libexec/at-spi-registryd'
> > s='/usr/libexec/at-spi-registryd'
> > bar 1 '/usr/libexec/at-spi-registryd'
> > Xlib:  extension "XEVIE" missing on display ":0.0".
> >
> > (gnome-session:30863): GLib-CRITICAL **: g_source_remove: assertion
> > `tag > 0' failed Bonobo accessibility support initialized GTK
> > Accessibility Module initialized
> > SESSION_MANAGER=local/xion:/tmp/.ICE-unix/30863
> > GTK Accessibility Module initialized
> > GTK Accessibility Module initialized
> > Bonobo accessibility support initialized Bonobo accessibility support
> > initialized GTK Accessibility Module initialized GTK Accessibility
> > Module initialized Bonobo accessibility support initialized GTK
> > Accessibility Module initialized GTK Accessibility Module initialized
> > GTK Accessibility Module initialized Bonobo accessibility support
> > initialized GTK Accessibility Module initialized GTK Accessibility
> > Module initialized GTK Accessibility Module initialized Bonobo
> > accessibility support initialized Bonobo accessibility support
> > initialized Bonobo accessibility support initialized GTK Accessibility
> > Module initialized GTK Accessibility Module initialized
> >
> > ** (gnome-panel:30950): WARNING **: Failed to establish a connection
> > with
> > GDM: No such file or directory
> > (II) Module already built-in
> >
> > waiting for X server to shut down ....
> >
> > xinit:  unexpected signal 2.
> > (xion)-<~> ->
> >
> >
> > -----Original Message-----
> > From: Scott Haeger [mailto:scott bashautomation com]
> > Sent: Wednesday, July 25, 2007 11:14 AM
> > To: Juan Hernandez
> > Subject: Re: [orca-list] Successfully using gnome and orca
> >
> > Juan Hernandez wrote:
> > > Hi guys, I just installed fedora 7 on to computers, a desktop and
> laptop.
> > >
> > > I cannot start xwindows+gnome+orca at all.
> > >
> > > Have you guys had any success with this?
> > >
> > > Please let me know, as I've been down for a day...
> > >
> > >
> > > _______________________________________________
> > > Orca-list mailing list
> > > Orca-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/orca-list
> > > Visit http://live.gnome.org/Orca for more information on Orca
> > >
> > >
> > How far have you gotten on the installation? The first step is to get
> > Gnome running. That should be an easy install with FC7. We'll guide
> > you from there.
> >
> > Scott
> >
> > _______________________________________________
> > Orca-list mailing list
> > Orca-list gnome org
> > http://mail.gnome.org/mailman/listinfo/orca-list
> > Visit http://live.gnome.org/Orca for more information on Orca
> >

--

Janina Sajka,   Phone:  +1.202.595.7777;        sip:janina a11y org
Partner, Capital Accessibility LLC      http://CapitalAccessibility.Com

Marketing the Owasys 22C talking screenless cell phone in the U.S. and
Canada
Learn more at http://ScreenlessPhone.Com

Chair, Open Accessibility       janina a11y org 
Linux Foundation                http://a11y.org
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]