GNOME.org
 

Re: [orca-list] Resp.: Successfully using gnome and orca

Thanks, Juan. Glad to hear you've got things working.


I think one should always use runlevel 5. I doubt anyone is even
debugging startx. Certainly, most users would be in runlevel 5, so
that's where all the attention goes.

Doesn't help me on my one trouble machine, though! <grin>

Juan Hernandez writes:

      I have an update on this problem.

I thought to see what would happen if I changed my run level to 5, to boot
directly into the gui.  I did this, and it works beautifully.  Orca runs
great, and gnome works great to.

So, I don't know what this means.

Thanks.

 

-----Original Message-----
From: Marlon Brandão de Sousa [mailto:splyt lists gmail com] 
Sent: Thursday, July 26, 2007 6:13 AM
To: Juan Hernandez
Cc: Scott Haeger; orca-list gnome org
Subject: Resp.: [orca-list] Successfully using gnome and orca

Hello,
trying to report this issue to the speakupmodified project would be a good
idea. Also it would help asking on a x project list could help.
Reading the logs I suspect that some component pre installed is broken, as
the x server is aparentely having trouble to go up. Or perhaps it is a
missing configuration. Are you trying to start x as root?
Marlon

2007/7/25, Juan Hernandez <juan netplus1 com>:

Well.

1.  I fully installed fc7 from the dvd provided off the 
speakupmodified website 2.  I installed my synth, TTSynth 3.  I did 
orca -t to configure orca via console, and it successfully found my 
synth, and went through the prompts for me.

I then tried to launch x and gnome, I typed at my prompt xinit

And I get nothing.  I get the following output, depending on when I 
use startx or xinit I get different outputs.

Below are is my script session.

Thx.

(xion)-<~> ->xinit
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: 
Fedora Core 7 Red Hat, Inc.
Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu 
Jun 14
05:35:26 UTC 2007 i686
Build Date: 11 June 2007
Build ID: xorg-x11-server 1.3.0.0-9.fc7
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:28:55 2007
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module already built-in
(II) Module already built-in

waiting for X server to shut down xterm:  fatal IO error 32 (Broken 
pipe) or KillClient on X server ":0.0"
FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.


xinit:  unexpected signal 2.
(xion)-<~> ->
(xion)-<~> ->startx
xauth:  creating new authority file /root/.serverauth.30838

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: 
Fedora Core 7 Red Hat, Inc.
Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu 
Jun 14
05:35:26 UTC 2007 i686
Build Date: 11 June 2007
Build ID: xorg-x11-server 1.3.0.0-9.fc7
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:30:03 2007
(==) Using config file: "/etc/X11/xorg.conf"

(II) Module already built-in
(II) Module already built-in
localuser:root being added to access control list 
v[0]='/usr/libexec/at-spi-registryd'
s='/usr/libexec/at-spi-registryd'
bar 1 '/usr/libexec/at-spi-registryd'
Xlib:  extension "XEVIE" missing on display ":0.0".

(gnome-session:30863): GLib-CRITICAL **: g_source_remove: assertion 
`tag > 0' failed Bonobo accessibility support initialized GTK 
Accessibility Module initialized
SESSION_MANAGER=local/xion:/tmp/.ICE-unix/30863
GTK Accessibility Module initialized
GTK Accessibility Module initialized
Bonobo accessibility support initialized Bonobo accessibility support 
initialized GTK Accessibility Module initialized GTK Accessibility 
Module initialized Bonobo accessibility support initialized GTK 
Accessibility Module initialized GTK Accessibility Module initialized 
GTK Accessibility Module initialized Bonobo accessibility support 
initialized GTK Accessibility Module initialized GTK Accessibility 
Module initialized GTK Accessibility Module initialized Bonobo 
accessibility support initialized Bonobo accessibility support 
initialized Bonobo accessibility support initialized GTK Accessibility 
Module initialized GTK Accessibility Module initialized

** (gnome-panel:30950): WARNING **: Failed to establish a connection 
with
GDM: No such file or directory
(II) Module already built-in

waiting for X server to shut down ....

xinit:  unexpected signal 2.
(xion)-<~> ->


-----Original Message-----
From: Scott Haeger [mailto:scott bashautomation com]
Sent: Wednesday, July 25, 2007 11:14 AM
To: Juan Hernandez
Subject: Re: [orca-list] Successfully using gnome and orca

Juan Hernandez wrote:

Hi guys, I just installed fedora 7 on to computers, a desktop and

laptop.


I cannot start xwindows+gnome+orca at all.

Have you guys had any success with this?

Please let me know, as I've been down for a day...


_______________________________________________
Orca-list mailing list
Orca-list gnome org
http://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information on Orca



How far have you gotten on the installation? The first step is to get 
Gnome running. That should be an easy install with FC7. We'll guide 
you from there.

Scott

_______________________________________________
Orca-list mailing list
Orca-list gnome org
http://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information on Orca



-- 

Janina Sajka,   Phone:  +1.202.595.7777;        sip:janina a11y org
Partner, Capital Accessibility LLC      http://CapitalAccessibility.Com

Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada
Learn more at http://ScreenlessPhone.Com

Chair, Open Accessibility       janina a11y org 
Linux Foundation                http://a11y.org
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]