[orca-list] Resp.: Successfully using gnome and orca

["Marlon Brandão de Sousa" <splyt lists gmail com>]

Hello,
trying to report this issue to the speakupmodified project would be a
good idea. Also it would help asking on a x project list could help.
Reading the logs I suspect that some component pre installed is
broken, as the x server is aparentely having trouble to go up. Or
perhaps it is a missing configuration. Are you trying to start x as
root?
Marlon

2007/7/25, Juan Hernandez <juan netplus1 com>:
> Well.
>
> 1.  I fully installed fc7 from the dvd provided off the speakupmodified
> website
> 2.  I installed my synth, TTSynth
> 3.  I did orca -t to configure orca via console, and it successfully found
> my synth, and went through the prompts for me.
>
> I then tried to launch x and gnome, I typed at my prompt xinit
>
> And I get nothing.  I get the following output, depending on when I use
> startx or xinit I get different outputs.
>
> Below are is my script session.
>
> Thx.
>
> (xion)-<~> ->xinit
> X Window System Version 1.3.0
> Release Date: 19 April 2007
> X Protocol Version 11, Revision 0, Release 1.3
> Build Operating System: Fedora Core 7 Red Hat, Inc.
> Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu Jun 14
> 05:35:26 UTC 2007 i686
> Build Date: 11 June 2007
> Build ID: xorg-x11-server 1.3.0.0-9.fc7
>         Before reporting problems, check http://wiki.x.org
>         to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:28:55 2007
> (==) Using config file: "/etc/X11/xorg.conf"
> (II) Module already built-in
> (II) Module already built-in
>
> waiting for X server to shut down xterm:  fatal IO error 32 (Broken pipe) or
> KillClient on X server ":0.0"
> FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.
>
>
> xinit:  unexpected signal 2.
> (xion)-<~> ->
> (xion)-<~> ->startx
> xauth:  creating new authority file /root/.serverauth.30838
>
> X Window System Version 1.3.0
> Release Date: 19 April 2007
> X Protocol Version 11, Revision 0, Release 1.3
> Build Operating System: Fedora Core 7 Red Hat, Inc.
> Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu Jun 14
> 05:35:26 UTC 2007 i686
> Build Date: 11 June 2007
> Build ID: xorg-x11-server 1.3.0.0-9.fc7
>         Before reporting problems, check http://wiki.x.org
>         to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:30:03 2007
> (==) Using config file: "/etc/X11/xorg.conf"
>
> (II) Module already built-in
> (II) Module already built-in
> localuser:root being added to access control list
> v[0]='/usr/libexec/at-spi-registryd'
> s='/usr/libexec/at-spi-registryd'
> bar 1 '/usr/libexec/at-spi-registryd'
> Xlib:  extension "XEVIE" missing on display ":0.0".
>
> (gnome-session:30863): GLib-CRITICAL **: g_source_remove: assertion `tag >
> 0' failed
> Bonobo accessibility support initialized
> GTK Accessibility Module initialized
> SESSION_MANAGER=local/xion:/tmp/.ICE-unix/30863
> GTK Accessibility Module initialized
> GTK Accessibility Module initialized
> Bonobo accessibility support initialized
> Bonobo accessibility support initialized
> GTK Accessibility Module initialized
> GTK Accessibility Module initialized
> Bonobo accessibility support initialized
> GTK Accessibility Module initialized
> GTK Accessibility Module initialized
> GTK Accessibility Module initialized
> Bonobo accessibility support initialized
> GTK Accessibility Module initialized
> GTK Accessibility Module initialized
> GTK Accessibility Module initialized
> Bonobo accessibility support initialized
> Bonobo accessibility support initialized
> Bonobo accessibility support initialized
> GTK Accessibility Module initialized
> GTK Accessibility Module initialized
>
> ** (gnome-panel:30950): WARNING **: Failed to establish a connection with
> GDM: No such file or directory
> (II) Module already built-in
>
> waiting for X server to shut down ....
>
> xinit:  unexpected signal 2.
> (xion)-<~> ->
>
>
> -----Original Message-----
> From: Scott Haeger [mailto:scott bashautomation com]
> Sent: Wednesday, July 25, 2007 11:14 AM
> To: Juan Hernandez
> Subject: Re: [orca-list] Successfully using gnome and orca
>
> Juan Hernandez wrote:
> > Hi guys, I just installed fedora 7 on to computers, a desktop and laptop.
> >
> > I cannot start xwindows+gnome+orca at all.
> >
> > Have you guys had any success with this?
> >
> > Please let me know, as I've been down for a day...
> >
> >
> > _______________________________________________
> > Orca-list mailing list
> > Orca-list gnome org
> > http://mail.gnome.org/mailman/listinfo/orca-list
> > Visit http://live.gnome.org/Orca for more information on Orca
> >
> >
> How far have you gotten on the installation? The first step is to get Gnome
> running. That should be an easy install with FC7. We'll guide you from
> there.
>
> Scott
>
> _______________________________________________
> Orca-list mailing list
> Orca-list gnome org
> http://mail.gnome.org/mailman/listinfo/orca-list
> Visit http://live.gnome.org/Orca for more information on Orca