|
Justin, You are very very kind. Yet I spent too much time on this and now, I'm going to install the distro physically on a Tower with 2 NIC and it will be Ok. Anyway, a great thanks for your support and I mark with plenty red flags your valuable mail. Many many thanks to you!!! Regards On 02/08/2013 18:53, Justin Brown
wrote:
Florent, If I understand you correctly, this should be easy. You will need to substitute id, uuid, and mac-address fields as necessary. /etc/NetworkManager/system-connections/eth0.ini [connection] id=eth0 uuid=7974cee9-c454-4d0f-93b1-37f93de2ae92 type=802-3-ethernet master=71abc14f-fd97-4d62-9a2b-6d07e8a2801c slave-type=bridge [802-3-ethernet] mac-address=00:1e:4f:fc:3e:02 [ipv4] method=ignore [ipv6] method=ignore ================== /etc/NetworkManager/system-connections/br0.ini [connection] id=br0 uuid=71abc14f-fd97-4d62-9a2b-6d07e8a2801c type=bridge autoconnect=true [bridge] interface-name=br0 [ipv4] method=manual dns=192.168.25.100;192.168.25.101 addresses1=192.168.25.10;192.168.25.1; =================== /etc/NetworkManager/NetworkManager.conf [main] plugins=keyfile chmod 600 those ini files and reboot. sysctl -w net.ipv4.ip_forward=1 Attach your guests to br0, and they will be able to communicate directly with your laptop's network. On Fri, Aug 2, 2013 at 11:34 AM, Florent THOMAS <mailinglist tdeo fr> wrote:On 02/08/2013 18:04, Justin Brown wrote: Florent, I think that I can point you in the right direction if you can answer a few questions. Thanks, I had to precise that this conf is only for testing. All my answers will concern the architecture for my tests. Once I will have validate everything, a pfsense router will be used. 1) Are the data and VOIP networks tagged with VLANs? Not for the moment and they won't be tagged. They are delivered directly behind the cisco router on 2 differents ports 2) Does your laptop need IP addresses for the data and/or VOIP networks, or does the laptop use a wireless network? The laptop need (I think) at least one IP on data to get in the network and communicate. 3) If the laptop needs IP addresses, are they DHCP or static? Everything is static In the end, I can have a virtual network that is NAT for the Guest on the device accessing datas, there is no problem for my tests. Yet, for the VoIP, my guest must use a specific IP and access to a specific one in order to register to a trunk sip. Thanks for all On Fri, Aug 2, 2013 at 10:58 AM, Florent THOMAS <mailinglist tdeo fr> wrote: Thanks for your answer. This kind of conf is giving me crayz. I think I will try another way. Anyway, My problem is the following. IP_Datas ------------| | IPVoIP ---------------| | SWITCH In the switch I plug my only ethernet device of my laptop. Inside the laptop I have a VM with 2 ethernet cards. I would like to know how to configure the virtual network for accessing both network physically form the VM guest. Regards On 02/08/2013 17:20, Justin Brown wrote: Florent, It depends by what you mean for virtual networking. If you want a Linux bridge attached to an ethernet interface (or VLAN) with KVM guests attaching vnets, yes, that is currently possible with NetworkManager. On the other hand, NetworkManager cannot control Open vSwitch or other advanced features. The documentation for NM is sorely lacking, but I have found the Fedora Networking guide, https://fedoraproject.org/wiki/Networking, to be useful. And if you get deep into NM keyfile configurations, https://projects.gnome.org/NetworkManager/developers/api/09/ref-settings.html lists all possible configuration keys. Regards, Justin On Fri, Aug 2, 2013 at 9:23 AM, Florent THOMAS <mailinglist tdeo fr> wrote: Hy folks Is networkmanager capable for managing bridges for virtual networking? Thanks Regards, Florent THOMAS _______________________________________________ networkmanager-list mailing list networkmanager-list gnome org https://mail.gnome.org/mailman/listinfo/networkmanager-list |