Hi, I'm trying to connect my Nokia N95 using phonet driver and NM. Device is picked up by kernel and properly initialized, but it doesn't connect due to some problems with ppp. Please have a look on log below and let me know what can be done to make it work. Sep 13 22:40:26 [kernel] [39436.837937] usb 2-1.2: new full speed USB device using ehci_hcd and address 10 Sep 13 22:40:26 [kernel] [39436.930958] usb 2-1.2: New USB device found, idVendor=0421, idProduct=0070 Sep 13 22:40:26 [kernel] [39436.930966] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 13 22:40:26 [kernel] [39436.930973] usb 2-1.2: Product: Nokia N95 8GB Sep 13 22:40:26 [kernel] [39436.930977] usb 2-1.2: Manufacturer: Nokia Sep 13 22:40:26 [kernel] [39436.931170] usb 2-1.2: configuration #1 chosen from 1 choice Sep 13 22:40:26 [kernel] [39436.941261] cdc_acm 2-1.2:1.10: ttyACM1: USB ACM device Sep 13 22:40:28 [NetworkManager] <info> (ttyACM1): found serial port (udev:GSM hal:GSM)_ Sep 13 22:40:28 [NetworkManager] <info> (ttyACM1): new Modem device (driver: 'cdc_acm')_ Sep 13 22:40:28 [NetworkManager] <info> (ttyACM1): exported as /org/freedesktop/Hal/devices/usb_device_421_70_noserial_if0_0_serial_unknown_1_ Sep 13 22:40:32 [NetworkManager] <info> (ttyACM1): device state change: 1 -> 2 (reason 2)_ Sep 13 22:40:32 [NetworkManager] <info> (ttyACM1): deactivating device (reason: 2)._ Sep 13 22:40:32 [NetworkManager] nm_ip4_config_add_nameserver: assertion `nameserver != s' failed Sep 13 22:40:32 [NetworkManager] <info> Policy set 'Auto eth2' (eth2) as default for routing and DNS._ Sep 13 22:40:32 [NetworkManager] nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed Sep 13 22:40:32 [NetworkManager] nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed Sep 13 22:40:32 [NetworkManager] <info> (ttyACM1): device state change: 2 -> 3 (reason 0)_ Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) starting connection 'Three'_ Sep 13 22:40:44 [NetworkManager] <info> (ttyACM1): device state change: 3 -> 4 (reason 0)_ Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) scheduled..._ Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) started..._ Sep 13 22:40:44 [NetworkManager] Invalid bits (0). Valid values are 5, 6, 7, 8. Sep 13 22:40:44 [NetworkManager] Invalid parity ( Sep 13 22:40:44 [NetworkManager] Invalid stop bits (0). Valid values are 1 and 2) Sep 13 22:40:44 [NetworkManager] <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) complete._ Sep 13 22:40:45 [NetworkManager] <info> (ttyACM1): powering up..._ Sep 13 22:40:45 [NetworkManager] <info> Registered on Home network_ Sep 13 22:40:45 [NetworkManager] <info> Associated with network: +COPS: 0,2,"23420",2_ Sep 13 22:40:45 [NetworkManager] <info> Connected, Woo!_ Sep 13 22:40:45 [NetworkManager] <info> Activation (ttyACM1) Stage 2 of 5 (Device Configure) scheduled..._ Sep 13 22:40:45 [NetworkManager] <info> Activation (ttyACM1) Stage 2 of 5 (Device Configure) starting..._ Sep 13 22:40:45 [NetworkManager] <info> (ttyACM1): device state change: 4 -> 5 (reason 0)_ Sep 13 22:40:45 [NetworkManager] <info> Starting pppd connection_ Sep 13 22:40:45 [NetworkManager] <info> Activation (ttyACM1) Stage 2 of 5 (Device Configure) complete._ Sep 13 22:40:45 [pppd] Plugin /usr/lib64/pppd/2.4.4/nm-pppd-plugin.so loaded. Sep 13 22:40:45 [pppd] pppd 2.4.4 started by root, uid 0 Sep 13 22:40:45 [pppd] Baud rate for /dev/ttyACM1 is 0; need explicit baud rate Sep 13 22:40:46 [pppd] Exit. Sep 13 22:40:46 [NetworkManager] <WARN> ppp_exit_code(): ppp pid 9500 exited with error: Fatal pppd error_ Sep 13 22:40:46 [NetworkManager] <info> (ttyACM1): device state change: 5 -> 9 (reason 14)_ Sep 13 22:40:46 [NetworkManager] <info> Marking connection 'Three' invalid._ Sep 13 22:40:46 [NetworkManager] <info> Activation (ttyACM1) failed._ Sep 13 22:40:46 [NetworkManager] <info> (ttyACM1): device state change: 9 -> 3 (reason 0)_ Sep 13 22:40:46 [NetworkManager] <info> (ttyACM1): deactivating device (reason: 0)._ Sep 13 22:40:46 [NetworkManager] nm_ip4_config_add_nameserver: assertion `nameserver != s' failed Sep 13 22:40:46 [NetworkManager] <info> Policy set 'Auto eth2' (eth2) as default for routing and DNS._ Sep 13 22:40:46 [NetworkManager] nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed Sep 13 22:40:47 [NetworkManager] nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed Thanks, Rob
Attachment:
signature.asc
Description: This is a digitally signed message part.