Re: NM and Nokia N95

[Trey Nolen <support internetpro net>]

It may be your provider.  I use Verizon, and to make mine work, I had to
edit the connection and enter a username/password.  Verizon's is <10
digit TN>@vzw3g.com with a password of vzw.  Some providers don't
require a password, but yours might.


Trey Nolen



On Sun, 2009-09-13 at 22:47 +0100, Robert Piasek wrote:
> Hi,
> 
> I'm trying to connect my Nokia N95 using phonet driver and NM. Device is 
> picked up by kernel and properly initialized, but it doesn't connect due to 
> some problems with ppp. Please have a look on log below and let me know what 
> can be done to make it work.
> 
> 
> Sep 13 22:40:26 [kernel] [39436.837937] usb 2-1.2: new full speed USB device 
> using ehci_hcd and address 10
> Sep 13 22:40:26 [kernel] [39436.930958] usb 2-1.2: New USB device found, 
> idVendor=0421, idProduct=0070    
> Sep 13 22:40:26 [kernel] [39436.930966] usb 2-1.2: New USB device strings: 
> Mfr=1, Product=2, SerialNumber=0
> Sep 13 22:40:26 [kernel] [39436.930973] usb 2-1.2: Product: Nokia N95 8GB                                  
> Sep 13 22:40:26 [kernel] [39436.930977] usb 2-1.2: Manufacturer: Nokia                                     
> Sep 13 22:40:26 [kernel] [39436.931170] usb 2-1.2: configuration #1 chosen from 
> 1 choice                   
> Sep 13 22:40:26 [kernel] [39436.941261] cdc_acm 2-1.2:1.10: ttyACM1: USB ACM 
> device                        
> Sep 13 22:40:28 [NetworkManager] <info>  (ttyACM1): found serial port 
> (udev:GSM  hal:GSM)_                 
> Sep 13 22:40:28 [NetworkManager] <info>  (ttyACM1): new Modem device (driver: 
> 'cdc_acm')_                  
> Sep 13 22:40:28 [NetworkManager] <info>  (ttyACM1): exported as 
> /org/freedesktop/Hal/devices/usb_device_421_70_noserial_if0_0_serial_unknown_1_
> Sep 13 22:40:32 [NetworkManager] <info>  (ttyACM1): device state change: 1 -> 
> 2 (reason 2)_
> Sep 13 22:40:32 [NetworkManager] <info>  (ttyACM1): deactivating device 
> (reason: 2)._
> Sep 13 22:40:32 [NetworkManager] nm_ip4_config_add_nameserver: assertion 
> `nameserver != s' failed
> Sep 13 22:40:32 [NetworkManager] <info>  Policy set 'Auto eth2' (eth2) as 
> default for routing and DNS._
> Sep 13 22:40:32 [NetworkManager] nm_system_device_flush_ip4_routes_with_iface: 
> assertion `iface_idx >= 0' failed
> Sep 13 22:40:32 [NetworkManager] 
> nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' 
> failed
> Sep 13 22:40:32 [NetworkManager] <info>  (ttyACM1): device state change: 2 -> 
> 3 (reason 0)_
> Sep 13 22:40:44 [NetworkManager] <info>  Activation (ttyACM1) starting 
> connection 'Three'_
> Sep 13 22:40:44 [NetworkManager] <info>  (ttyACM1): device state change: 3 -> 
> 4 (reason 0)_
> Sep 13 22:40:44 [NetworkManager] <info>  Activation (ttyACM1) Stage 1 of 5 
> (Device Prepare) scheduled..._
> Sep 13 22:40:44 [NetworkManager] <info>  Activation (ttyACM1) Stage 1 of 5 
> (Device Prepare) started..._
> Sep 13 22:40:44 [NetworkManager] Invalid bits (0). Valid values are 5, 6, 7, 
> 8.
> Sep 13 22:40:44 [NetworkManager] Invalid parity (
> Sep 13 22:40:44 [NetworkManager] Invalid stop bits (0). Valid values are 1 and 
> 2)
> Sep 13 22:40:44 [NetworkManager] <info>  Activation (ttyACM1) Stage 1 of 5 
> (Device Prepare) complete._
> Sep 13 22:40:45 [NetworkManager] <info>  (ttyACM1): powering up..._
> Sep 13 22:40:45 [NetworkManager] <info>  Registered on Home network_
> Sep 13 22:40:45 [NetworkManager] <info>  Associated with network: +COPS: 
> 0,2,"23420",2_
> Sep 13 22:40:45 [NetworkManager] <info>  Connected, Woo!_
> Sep 13 22:40:45 [NetworkManager] <info>  Activation (ttyACM1) Stage 2 of 5 
> (Device Configure) scheduled..._
> Sep 13 22:40:45 [NetworkManager] <info>  Activation (ttyACM1) Stage 2 of 5 
> (Device Configure) starting..._
> Sep 13 22:40:45 [NetworkManager] <info>  (ttyACM1): device state change: 4 -> 
> 5 (reason 0)_
> Sep 13 22:40:45 [NetworkManager] <info>  Starting pppd connection_
> Sep 13 22:40:45 [NetworkManager] <info>  Activation (ttyACM1) Stage 2 of 5 
> (Device Configure) complete._
> Sep 13 22:40:45 [pppd] Plugin /usr/lib64/pppd/2.4.4/nm-pppd-plugin.so loaded.
> Sep 13 22:40:45 [pppd] pppd 2.4.4 started by root, uid 0
> Sep 13 22:40:45 [pppd] Baud rate for /dev/ttyACM1 is 0; need explicit baud 
> rate
> Sep 13 22:40:46 [pppd] Exit.
> Sep 13 22:40:46 [NetworkManager] <WARN>  ppp_exit_code(): ppp pid 9500 exited 
> with error: Fatal pppd error_
> Sep 13 22:40:46 [NetworkManager] <info>  (ttyACM1): device state change: 5 -> 
> 9 (reason 14)_
> Sep 13 22:40:46 [NetworkManager] <info>  Marking connection 'Three' invalid._
> Sep 13 22:40:46 [NetworkManager] <info>  Activation (ttyACM1) failed._
> Sep 13 22:40:46 [NetworkManager] <info>  (ttyACM1): device state change: 9 -> 
> 3 (reason 0)_
> Sep 13 22:40:46 [NetworkManager] <info>  (ttyACM1): deactivating device 
> (reason: 0)._
> Sep 13 22:40:46 [NetworkManager] nm_ip4_config_add_nameserver: assertion 
> `nameserver != s' failed
> Sep 13 22:40:46 [NetworkManager] <info>  Policy set 'Auto eth2' (eth2) as 
> default for routing and DNS._
> Sep 13 22:40:46 [NetworkManager] nm_system_device_flush_ip4_routes_with_iface: 
> assertion `iface_idx >= 0' failed
> Sep 13 22:40:47 [NetworkManager] 
> nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' 
> failed
> 
> 
> Thanks,
> Rob
> _______________________________________________
> NetworkManager-list mailing list
> NetworkManager-list gnome org
> http://mail.gnome.org/mailman/listinfo/networkmanager-list