Re: Mobile Broadband -> Disconnect option broken? [PATCH]

[Dan Williams <dcbw redhat com>]

On Thu, 2009-05-07 at 15:05 -0400, Raul Gutierrez Segales wrote:
> Dan, 
> 
> The attached patch fixed the problem for me. The out_active variable
> wasn't been assigned in applet_find_active_connection_for_device.
> 
> Sounds correct?

Yup, committed, thanks!

Dan

> On Thu, 2009-05-07 at 13:47 -0400, Dan Williams wrote:
> > On Thu, 2009-05-07 at 11:17 -0400, Raul Gutierrez Segales wrote:
> > > Dan,
> > > 
> > > On Thu, 2009-05-07 at 10:51 -0400, Dan Williams wrote:
> > > > On Mon, 2009-05-04 at 23:50 -0400, Raul Gutierrez Segales wrote:
> > > > > Hi,
> > > > > 
> > > > > I am running Network Manager version 0.7.1~rc4.1.cf199a964-0ubuntu2 on
> > > > > Ubuntu 9.04.
> > > > > 
> > > > > For some reason that I haven't been able to debug yet, the
> > > > > network-manager-applet completely ignores the disconnect command for 3G
> > > > > GSM connection. 
> > > > > 
> > > > > My 3G modem is a (output from lsusb) :
> > > > > 
> > > > > Bus 005 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220
> > > > > HSDPA Modem / E270 HSDPA/HSUPA Modem
> > > > > 
> > > > > Is this known to be broken? Seems like a matter of capturing the event
> > > > > and killing pppd (I have to do it by hand now..). 
> > > > 
> > > > I'd need some logs from /var/log/messages, /var/log/daemon.log,
> > > > or /var/log/NetworkManager.log (wherever your distro puts NM log output
> > > > which goes to the syslog 'daemon' facility), and then some logs from
> > > > ~/.xsession-errors, which is where applet error output would go.
> > > > 
> > > 
> > > Nothing interesting comes out on /var/log/daemon.log (daemon facility)
> > > when trying to disconnect, I am attaching it though. 
> > > 
> > > 
> > > But here is what I got on ~/.xsession-errors when clicking the
> > > Disconnect item :
> > > 
> > > ** (nm-applet:4990): WARNING **: gsm_menu_item_deactivate: couldn't find
> > > active connection to deactive
> > 
> > When you get this error, can you run 'nm-tool' and tell me what the
> > output is?
> > 
> > dan
> > 
> > 
> >