Re: Dial-up setting for Motorola V360 using EDGE mobile network.

["Darren Albers" <dalbers gmail com>]

On 8/5/07, Bent Lykkebo <forum bent-lykkebo dk> wrote:
> Is it possible to use the Network Manager Applet under Ubuntu 7.04 for
> dial-up to the Internet using a Motorola V360 mobile (EDGE mobile network).
>
> I have it working using pon/poff and my setting is as shown below. But I
> cannot find a way to do the setting so that the Network Manager Applet
> can be used to connect and disconnect the connection, please help.
>
> My pon/poff setting is:
> /etc/ppp/peers/mero:
> /dev/ttyACM0
> 230400 #Speed
> defaultroute #Use the network for the default root
> usepeerdns #use the DNS servers from the remote network
> nodetach #keep PPD in foreground
> crtscts #hardware flow control
> lock #lock the serial port
> noauth #don't expect modem to authenticate itself
> local #don'r use carrier detect or DTR
> crtscts
> debug
> noipdefault
>
> #Prevent dial line checking as it does'nt work with SE T630
> #causes it to disconnect
> lcp-echo-interval 0
> lcp-echo-failure 0
>
> connect "/usr/sbin/chat -v -f /etc/chatscripts/mero-connect"
> disconnect "/usr/sbin/chat -v -f /etc/chatscripts/mero-disconnect"
>
> /etc/chatscripts/mero-connect:
> TIMEOUT 10
> ABORT 'BUSY'
> ABORT 'NO ANSWER'
> ABORT 'ERROR'
> SAY 'Starting GPRS connection\n'
>
> #Get the modem's attention and reset it.
> "" 'ATZ'
>
> #Set APN
> SAY 'Setting APN\n'
> OK 'AT+CGDCONT=3,"IP","Mero"'
>
> #Dial the number
> ABORT 'NO CARRIER'
> SAY 'Dialing CID 3 ... \n'
> OK 'ATD*99***3#'
> CONNECT ''
>
> /etc/chatscripts/mero-disconnect:
> "" "\K"
> "" "+++ATHO"
> SAY "GPRS disconnected."
>
> Thanks
> BanjoBoy
>

PPP support is planned for the 0.7 release.  If you would like a GUI
for GSM phones try GPRSEC, it is a little rough but it works until 0.7
is complete...