Re: rt2x00/rt2500 support

[Dan Williams <dcbw redhat com>]

On Thu, 2006-07-13 at 12:14 +1200, Eion Robb wrote:
> The changes made by IvD on the rt2x00 project was to add
> SET_NETDEV_DEV(ndev, dev->class_dev.dev);
> in the ieee80211_if_add function in ieee80211_iface.c, after
> ndev->flags = dev->flags & IFF_MULTICAST;
> and in the ieee80211_if_add_mgmt function after
> ndev->mem_end = dev->mem_end;
> 
> 
> For the record, the new device settings in the hal-device dump is
> 1: udi = '/org/freedesktop/Hal/devices/net_00_0d_f0_17_33_ba'
>    info.udi = '/org/freedesktop/Hal/devices/net_00_0d_f0_17_33_ba'  (string)
>    linux.subsystem = 'net'  (string)
>    linux.hotplug_type = 2  (0x2)  (int)
>    net.80203.mac_address = 59862627258  (0xdf01733ba)  (uint64)
>    info.product = 'Networking Interface'  (string)
>    net.interface_up = false  (bool)
>    net.arp_proto_hw_id = 1  (0x1)  (int)
>    net.linux.ifindex = 8  (0x8)  (int)
>    net.address = '00:0d:f0:17:33:ba'  (string)
>    net.interface = 'wlan0'  (string)
>    net.physical_device = '/org/freedesktop/Hal/devices/pci_1814_201'   
> (string)
>    info.capabilities = { 'net', 'net.80203' } (string list)
>    info.category = 'net.80203'  (string)
>    info.parent = '/org/freedesktop/Hal/devices/pci_1814_201'  (string)
>    linux.sysfs_path = '/sys/class/net/wlan0'  (string)
> Which is strange: it's showing up specifially as 'net.80203', instead of  
> the generic 'net'

Hmm, I can't open your attached tree output...  seems to be a binary
file, while it should be plain text.

Dan