connection fails

[Hannes Wijers <hannes wijers gmx net>]

hello,

i have installed the networkmanager. It seems to run fine. It shows all 
available wireless networks but it fails on connecting.

here is part of the result of NetworkManager --no-daemon

NetworkManager: <information> wpa_supplicant(13848): Starting AP scan 
(broadcast SSID)
NetworkManager: <information> wpa_supplicant(13848): Trying to get current 
scan results first without requesting a new scan to speed up initial 
association
NetworkManager: <information> wpa_supplicant(13848): Received 226 bytes of 
scan results (1 BSSes)
NetworkManager: <information> wpa_supplicant(13848): Scan results: 1
NetworkManager: <information> wpa_supplicant(13848): Selecting BSS from 
priority group 0
NetworkManager: <information> wpa_supplicant(13848): 0: 00:0f:b5:56:62:fe 
ssid='NETGEAR' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
NetworkManager: <information> wpa_supplicant(13848): selected based on WPA IE
NetworkManager: <information> wpa_supplicant(13848): NETGEAR' freq=0 MHz)
.....
NetworkManager: <information> Activation (eth1/wireless): association took too 
long (>20s), failing activation.
NetworkManager: <information> Activation (eth1) failure scheduled...
NetworkManager: <information> Activation (eth1) failed for access point 
(NETGEAR)
NetworkManager: <information> Activation (eth1) failed.
NetworkManager: <information> Deactivating device eth1.

i think the problem is "freq=0 MHz"

--> here is all the output of networkmanager in no-daemon mode: 
http://nopaste.php-q.net/232892


networkmanager: 0.6.4-r1
wpa_supplicant: 0.5.4
kernel: 2.6.17-rc3 with bcm43xx built as module

i don`t know whats wrong ... connecting manually works perfect.