Re: [Evolution] Re: Clie synch problems

[Stephen Witkop <switkop charter net>]

On RH 8 I use /dev/usb/ttyUSB1 which works for my Palm m515. I just
                   ^^^
 did some testing and with /dev/ttyUSB1 /sbin/lsusb shows the Palm but
it won't sync. Switch it back and it works.

On Wed, 2003-02-05 at 23:52, Scott Otterson wrote:
> Alexandre,
>
> My USB port must be mounted on USB1.  If I try
>
>        pilot-xfer -p /dev/ttyUSB0 -l
>
> I get a "no such device message."  If I do the same with /dev/ttyUSB1,
> then I get the message asking me to push the hotsync button.
>
> But if I do so, nothing happens and the Clie times out.  However, the
> port does seem to work.  In root, if I type:
>
>  /sbin/lsusb
>
> I do see the Clie on USB1 (message below)
>
> -----------------------
> Output of lsusb:
>
> Bus 001 Device 004: ID 054c:0066 Sony Corp.
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.00
>   bDeviceClass            0 Interface
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0        16
>   idVendor           0x054c Sony Corp.
>   idProduct          0x0066
>   bcdDevice            1.00
>   iManufacturer           1 Palm, Inc.
>   iProduct                2 Palm Handheld
>   iSerial                 0
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           46
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0xc0
>       Self Powered
>     MaxPower                2mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           4
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass      0 
>       bInterfaceProtocol      0 
>       iInterface              0 
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               none
>         wMaxPacketSize         16
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               none
>         wMaxPacketSize         16
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               none
>         wMaxPacketSize         64
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               none
>         wMaxPacketSize         64
>         bInterval               0
>   Language IDs: (length=4)
>      0409 English(US)
>
>
> It doesn't matter which port I use:  USB
> > Scott Otterson wrote :
> > > I'm trying to synch my Sony Clie SJ20 to evolution.  I've read the
> > back
> > > issues of this group, and as far as I can tell, I've got things set up
> > > like they're supposed to be (USB1, 57600, etc.).  But nothing happens
> > > when I click Clie hotsync button.  Eventually, it times out.
> > > =20
> > > My only clue might be in /var/log/message (see below)  Does this
> > suggest
> > > a solution to anybody?
> >
> > Hi Scott,
> > Did you configure the right USB port in the Evo preferences for gpilot?
> > To see which port your Clie uses, hit the Hotsync button, and then run
> > "pilot-xfer -p /dev/ttyUSB0 -l", if you don't get a list of the
> > installed apps on your Palm, try /dev/ttyUSB1. For me (Mandrake 9.0),
> > the port is /dev/tts/usb/0 (devfs).
> > Then go in Evo Tools, Pilot Settings, and set the port of your cradle on
> > the adequate port.
> >
> > Alexandre Aractingi <aaractingi libertysurf fr>
>
> _______________________________________________
> evolution maillist  -  evolution lists ximian com
> http://lists.ximian.com/mailman/listinfo/evolution
-- 
Stephen