[Evolution] Re: Clie synch problems



Alexandre,

My USB port must be mounted on USB1.  If I try

         pilot-xfer -p /dev/ttyUSB0 -l

I get a "no such device message."  If I do the same with /dev/ttyUSB1,
then I get the message asking me to push the hotsync button.

But if I do so, nothing happens and the Clie times out.  However, the
port does seem to work.  In root, if I type:

 /sbin/lsusb

I do see the Clie on USB1 (message below)

-----------------------
Output of lsusb:

Bus 001 Device 004: ID 054c:0066 Sony Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass            0 Interface
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        16
  idVendor           0x054c Sony Corp.
  idProduct          0x0066
  bcdDevice            1.00
  iManufacturer           1 Palm, Inc.
  iProduct                2 Palm Handheld
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         16
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         16
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         64
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         64
        bInterval               0
  Language IDs: (length=4)
     0409 English(US)


It doesn't matter which port I use:  USB
Scott Otterson wrote :
I'm trying to synch my Sony Clie SJ20 to evolution.  I've read the
back
issues of this group, and as far as I can tell, I've got things set up
like they're supposed to be (USB1, 57600, etc.).  But nothing happens
when I click Clie hotsync button.  Eventually, it times out.
=20
My only clue might be in /var/log/message (see below)  Does this
suggest
a solution to anybody?

Hi Scott,
Did you configure the right USB port in the Evo preferences for gpilot?
To see which port your Clie uses, hit the Hotsync button, and then run
"pilot-xfer -p /dev/ttyUSB0 -l", if you don't get a list of the
installed apps on your Palm, try /dev/ttyUSB1. For me (Mandrake 9.0),
the port is /dev/tts/usb/0 (devfs).
Then go in Evo Tools, Pilot Settings, and set the port of your cradle on
the adequate port.

Alexandre Aractingi <aaractingi libertysurf fr>




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]