Re: [Evolution] Installation Problem

[Tim Boring <tboring insight rr com>]

Actually, I haven't been using CVS.   I tried uninstalling everything 
and getting the CVS packages tonight...but didn't have much success.  
I'm going to try getting new tarballs and see if that makes a difference 
(CVS is new to me and learning how to use it more effectively isn't my 
top priority right now--I'm trying to get Slackware up and running on 
another box). 

Thanks,  :-)
Tim

Jeffrey Stedfast wrote:

> Looks like the evolution tarball you got was a little borked. The
> directories that didn't contain Makefile.in's have been removed in favor
> of newer directories/code.
>
> If you're using CVS, you might try doing another cvs -z3 co evolution
> (after removing the old source tree).
>
> Jeff
>
> On 11 Mar 2001 19:39:10 -0500, Tim Boring wrote:
>
> > Thanks, Jeff!  Found the package and got it installed.  The 
> > xml-i18n-tools package took care of the compilation problem with 
> > gnome-vfs--however, during ./configure I still got the complaint about 
> > sed not finding the files in the intl directory, and when I checked out 
> > that directory found that the two files sed was looking for were 0 byte 
> > files.  So I then removed the gnome-vfs directory--which was ver. 
> > 0.50--and download ver. 0.4.2...but got the same results.   Hmmm? More 
> > on this in a minute.
> >
> > So I (think) I got gnome-vfs installed.  Then I moved on to evolution 
> > and got the following error msg. during ./configure:
> >
> > sed: can't read ./executive-summary/widgets/Makefile.in: No such file or 
> > directory
> > sed: can't read ./camel/providers/mbox/Makefile.in: No such file or 
> > directory
> > sed: can't read ./camel/providers/mh/Makefile.in: No such file or directory
> >
> > So I checked these directories, and sure enough there is no Makefile.in; 
> > there are Makefiles in each, but they're all 0 byte files.  So I went on 
> > and tried to compile and get the following error msgs.:
> >
> > /opt/gnome/share/idl/bonobo-moniker.idl:19: Warning: 
> > `ALLOW_USER_INTERACTION' underscores within identifiers are discouraged 
> > for use with C-language IDL mappings
> > /opt/gnome/share/idl/bonobo-moniker.idl:19: Warning: 
> > `ALLOW_USER_INTERACTION' underscores within identifiers are discouraged 
> > for use with C-language IDL mappings
> > /opt/gnome/share/idl/bonobo-moniker.idl:19: Warning: 
> > `ALLOW_USER_INTERACTION' underscores within identifiers are discouraged 
> > for use with C-language IDL mappings
> > .libs/libibex.a(ibex_block.o): In function `ibex_normalise_word':
> > /home/tjboring/evolution/evolution-0.8/libibex/ibex_block.c:62: 
> > undefined reference to `unicode_get_utf8'
> > .libs/libibex.a(ibex_block.o): In function `utf8_category':
> > /home/tjboring/evolution/evolution-0.8/libibex/ibex_block.c:130: 
> > undefined reference to `unicode_isalpha'
> > collect2: ld returned 1 exit status
> > make[2]: *** [dumpindex] Error 1
> > make[1]: *** [all-recursive] Error 1
> > make: *** [all-recursive-am] Error 2
> >
> > I don't know exactly what all this means, but I take it the 
> > ALLOW_USER_INTERACTION just doesn't meet the C language standard or 
> > something.  As for the undefined references: is this a package different 
> > from libunicode?  Because I do have libunicode installed and this is the 
> > first complaint I've seen about 'unicode..." anything.
> >
> > I don't know if this makes a difference, but I haven't been using the 
> > CVS packages.  Should I try installing the necessary packages from CVS 
> > and see what happens?
> >
> > At this point, I'm open to suggestions. 
> >
> > Thanks,
> > Tim
> >
> > Jeffrey Stedfast wrote:
> >
> > > There should be a package on ftp.gnome.org called xml-i18n-tools, you'll
> > > need to get that and install it before you install most of the other
> > > packages.
> > >
> > > Jeff
> > >
> > > On 10 Mar 2001 23:35:08 -0500, Tim Boring wrote:
> > >
> > > > Hi!  So far, I've compiled and installed GConf, bonobo, gtkhtml, and oaf 
> > > > successfully.  I'm hitting a wall with gnome-vfs, however.  I'm 
> > > > configuring gnome-vfs-0.5 by './configure  --prefix=/opt/gnome 
> > > > --sysconfdir=/etc/opt/gnome' and everything seems to go fine with this 
> > > > one exception:
> > > >
> > > > sed: can't read ./intl/po2tbl.sed.in: No such file or directory
> > > > sed: can't read ./intl/Makefile.in: No such file or directory
> > > >
> > > > I'm hoping this has something to do with internalization and isn't 
> > > > important.
> > > >
> > > > But, upon compiling I get the following error msg:
> > > >
> > > > make[3]: ../../xml-i18n-merge: Command not found
> > > > make[3]: *** [gnome-vfs.keys] Error 127
> > > > make[2]: *** [all-recursive] Error 1
> > > > make[1]: *** [all-recursive] Error 1
> > > > make: *** [all-recursive-am] Error 2
> > > >
> > > > I take it the xml-i18n-merge is some kind of feature for the merging of 
> > > > documents, etc.  But does it also have to do with internationalization 
> > > > (i18n) and do I need it?  I'm asking because I tried going ahead and 
> > > > doing 'make install' for this package, but then when I get to running 
> > > > the configure script for evolution it complains about gnome-vfs not 
> > > > being installed. 
> > > >
> > > > I guess my question is this: if I need this "xml-i18n-merge" to proceed 
> > > > from here where do I get it?  If I don't need it...hmmm.  What's the 
> > > > next step to solve this problem?
> > > >
> > > > Any help is appreciated.
> > > >
> > > > Thanks,
> > > > Tim
> > > >
> > > >
> > > > _______________________________________________
> > > > evolution maillist  -  evolution helixcode com
> > > > http://lists.helixcode.com/mailman/listinfo/evolution
> > >
> > >
> > >
> > > _______________________________________________
> > > evolution maillist  -  evolution helixcode com
> > > http://lists.helixcode.com/mailman/listinfo/evolution
> >
> > _______________________________________________
> > evolution maillist  -  evolution helixcode com
> > http://lists.helixcode.com/mailman/listinfo/evolution