Re: [Ekiga-list] audio input not working



On 24/03/11 09:49, Giorgio wrote:
Il 22/03/2011 15:55, Eugen Dedu ha scritto:
On 14/03/11 19:19, Giorgio wrote:
Il 14/03/2011 18:17, Eugen Dedu ha scritto:
On 13/03/11 19:43, Giorgio wrote:
When I run echo test I hear the message but I get no echo of my voice.
Same during call: I hear the voice but my friend don't hear me.

Of course my hardware works normally with others SW. In Windows 7
Ekiga
audio works with same hardware.

OS: Linux Mandriva 2010.2 64 bit,
Ekiga 3.2.6

You need to send us the debug output (-d 4).
The file has been created during the following operations:

1) start Ekiga from terminal with this command/ekiga -d 4
2>ekiga_debug_1.txt/
2) wait till opening is complete
3) call echo test
4) wait end of echo test message
5) speak several times into microphone
6) close Ekiga

hope it's what you asked for.
Attached you'll find the compressed version of file.

Also, what the following commands print on your machine?

snoopy:~$ cat /proc/sys/net/ipv4/udp_mem
375744 500992 751488
snoopy:~$ cat /proc/sys/net/ipv4/udp_rmem_min
4096
snoopy:~$ cat /proc/sys/net/ipv4/udp_wmem_min
4096
snoopy:~$ ls -l /proc/sys/net/ipv4/udp_*
-rw-r--r-- 1 root 0 Mar 22 15:54 /proc/sys/net/ipv4/udp_mem
-rw-r--r-- 1 root 0 Mar 22 15:54 /proc/sys/net/ipv4/udp_rmem_min
-rw-r--r-- 1 root 0 Mar 22 15:54 /proc/sys/net/ipv4/udp_wmem_min
snoopy:~$

Hoping that's what you need. It seems very similar to your data.
My pc is a CompaQ Presario CQ60 with Dual Core 2 and 4 GiB of RAM.

[giorgio@Presario_G_L ~]$ cat /proc/sys/net/ipv4/udp_mem
370752 494336 741504
[giorgio@Presario_G_L ~]$ cat /proc/sys/net/ipv4/udp_rmem_min
4096
[giorgio@Presario_G_L ~]$ cat /proc/sys/net/ipv4/udp_wmem_min
4096
[giorgio@Presario_G_L ~]$ ls -l /proc/sys/net/ipv4/udp_*
-rw-r--r-- 1 root root 0 2011-03-24 09:45 /proc/sys/net/ipv4/udp_mem
-rw-r--r-- 1 root root 0 2011-03-24 09:46 /proc/sys/net/ipv4/udp_rmem_min
-rw-r--r-- 1 root root 0 2011-03-24 09:46 /proc/sys/net/ipv4/udp_wmem_min
[giorgio@Presario_G_L ~]$

Ok, so there is no problem here.

--
Eugen


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]