Re: [Ekiga-list] Microphone not detected only with ekiga

[Joseph Dumont <jjlynx gmail com>]

Hello,

I just wanted to followup and see if the ekiga -d 4 output was not
enough to diagnose the problem. I'm happy to send any other info needed.
Once again that output can be found here:
http://www.4shared.com/document/RF_HTmAa/output.html

Thanks for your help,
Joseph

> ekiga -d 4 output is posted here.
> <http://www.4shared.com/document/RF_HTmAa/output.html>
> Thanks again for your help!
>
> On 08/25/2011 07:28 AM, ekiga-list-request gnome org wrote:
>>> Hello,
>>>> I've just installed Ekiga 3.2.7 on OpenSuse 11.4, 2.6.37.1-1.2-desktop,
>>>> on a Thinkpad T410 (single audio combo jack).
>>>>
>>>> I've followed the Audio Setup page, set all audio devices to the Default
>>>> (PTLIB/ALSA) (and later everything else just to check), I confirmed that
>>>> my ALSA configuration was working properly as both echo tests functioned
>>>> flawlessly:
>>>>
>>>> $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0
>>>> -c 1 -r 8000 -f S16_LE -
>>>> $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0
>>>> -c 1 -r 16000 -f S16_LE -
>>>>
>>>> But I am unable to perform an echo test within Ekiga. I can receive
>>>> calls and hear the audio, but the microphone will not pick anything up.
>>>> Looking at other archives, I didn't see a solution that worked for me.
>>>>
>>>> More info that might be useful:
>>>> $ alsamixer
>>>> tells me that Master and Capture are both 100%
>>>>
>>>> $/sbin/lspci | grep Aud
>>>> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
>>>> High Definition Audio (rev 06)
>>>>
>>>> The codecs are set to their defaults: Speex, PCMU, PCMA, silence
>>>> detection and echo cancelation are not enabled.
>>>>
>>>> The same headpiece performs under skype.
>>>>
>>>> I'm happy to send any other information.
>> Send us the -d 4 output when calling 500 ekiga net and when you speak 
>> you do not ehar yourself.