Re: [Ekiga-list] Microphone not detected only with ekiga

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

On 23/08/11 01:58, Joseph Dumont wrote:
> Hello,
>
> I've just installed Ekiga 3.2.7 on OpenSuse 11.4, 2.6.37.1-1.2-desktop,
> on a Thinkpad T410 (single audio combo jack).
>
> I've followed the Audio Setup page, set all audio devices to the Default
> (PTLIB/ALSA) (and later everything else just to check), I confirmed that
> my ALSA configuration was working properly as both echo tests functioned
> flawlessly:
>
> $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0
> -c 1 -r 8000 -f S16_LE -
> $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0
> -c 1 -r 16000 -f S16_LE -
>
> But I am unable to perform an echo test within Ekiga. I can receive
> calls and hear the audio, but the microphone will not pick anything up.
> Looking at other archives, I didn't see a solution that worked for me.
>
> More info that might be useful:
> $ alsamixer
> tells me that Master and Capture are both 100%
>
> $/sbin/lspci | grep Aud
> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
> High Definition Audio (rev 06)
>
> The codecs are set to their defaults: Speex, PCMU, PCMA, silence
> detection and echo cancelation are not enabled.
>
> The same headpiece performs under skype.
>
> I'm happy to send any other information.

Send us the -d 4 output when calling 500 ekiga net and when you speak 
you do not ehar yourself.

--
Eugen