Re: [Ekiga-list] Fedora 12 testing packages for NAT traversal support

[yannick <sevmek free fr>]

Le samedi 24 avril 2010 à 17:18 -0400, Bob Goodwin a écrit :
> On 24/04/10 16:41, yannick wrote:
> > Le samedi 24 avril 2010 à 16:07 -0400, Bob Goodwin a écrit :
> >    
> >> On 24/04/10 15:57, David Ford wrote:
> >>      
> >>> Thanks Yannick and Chipper
> >>> I will do a fresh install of FC 12 and give it a try
> >>> Thanks again
> >>> David
> >>>
> >>> On 24/04/10 11:21, yannick wrote:
> >>>        
> >>>> Hi,
> >>>>
> >>>> Chipper did binary packages for Fedora 12 including the NAT traversal
> >>>> patch (add STUN support for the audio and video streams).
> >>>>
> >>>> Please test them and report here:
> >>>> http://ekiga.net/yannick/f12/
> >>>>
> >>>> (You just need to install opal-3.6.6-1.1.fc12.i686.rpm if your using the
> >>>> 32 bits version of Fedora, or opal-3.6.6-1.1.fc12.x86_64.rpm if you're
> >>>> using the 64 bits version)
> >>>>
> >>>> Many thanks to Chipper.
> >>>>
> >>>> Best regards,
> >>>> Yannick
> >>>>
> >>>> _______________________________________________
> >>>>          
> >>>        
> >>      What is "opal?" Is it a replacement for Ekiga? Can I install it on
> >>      my F-12 box here? Must I remove Ekiga first?
> >>
> >>      Bob
> >>      
> > OPAL is an Ekiga dependency.
> >
> > Among other libraries, Ekiga use mainly PTLIB and OPAL.
> > PTLIB basically offer the hardware management part, while OPAL basically
> > offers protocols (like H323, SIP) and codecs (like speex, H261,...).
> > The website for PTLIB and OPAL is here: http://www.opalvoip.org/
> >
> > Ekiga is build on them. You already have OPAL installed. The version I
> > propose is the same as the one you have already + a small patch for
> > better NAT traversal support of the audio and video streams.
> >
> > You just have to install as I told in the first message, it should just
> > replace the existing OPAL. Then use Ekiga as usual. (There is no need to
> > change the Ekiga package, the patch is small and it is binary
> > compatible)
> >
> > Best regards,
> > Yannick
> >    
> 
>     Good I will try it, probably tomorrow. Thanks for the explanation.
> 
>     Bob
> 
> 

I updated the page with an explanation and our default design:
http://ekiga.net/yannick/f12/

Best regards,
Yannick