[orca-list] Problems with read all and compilation of at-spi

["mk360" <rexxe tutopia com>]

   Hi...

   I'm having problems when I use the comand read all in some aplications. 
I been having problems for a while with the comand read all in openoffice 
(reading was interrupted with no reason and then, when a I tried to 
restarted it, it began several lines ahead) so I don't usually use it. 
However, yesterday I decided to give it a shot, considering that the 
repositories of tiflolinux where directly in .dev, wich I thought could work 
eficiently considering that I always worked from sources and maybe there was 
my problem.
Well, the reading error has changed, since it's true that now it's 
interrumpted, this happens in a different way. Now, if a star the reading, 
this developes apperently until the ending of the frase, and then if I want 
to continue it's necesary to press any key (I use ctrl) until it ends the 
subsecuent frase and so until the end.
After this new failure I decided not to follow wuth OO,or at least, to read 
the changelogs in the sources to see if an important change had been made, 
however,when I was reading "download and install orca" in wiki,I found the 
same error, the difference is that now, instead interrumping when a frase is 
finished, it does when any element is found,for example, some link. I had 
alredy faced this error a week ago aproximately,but I didn't pay atention 
becouse at that moment it was when reading rss in thunderbird and I tought 
that,like in several ocasions,should by a suport error from orca or changes 
in the acsesibility methods of thunderbird, so I didn't noticed at that time 
that the reading continued when if I pressed crtl. However,now I checked, in 
inet has worried me most.
i've generated two logs, the first with orca reading the word document in OO 
and the second with orca reading in wiki, and can be checked in 
http://mk360.heliohost.org/orca Also, I've left the text that I was cheking 
(even though apperently happens with any text). Unfortunately it's in 
spanish and about laws, but I think it can be useful to identify wich the 
problem is. By the way, I've commented this error in the spanish list and at 
least one person answered, and had the same problem. Both of us are the v. 
27.2.

Well, the problems With at-spi... as I said, after the errors, I decided to 
install orca from the sources (?) (thats how I've always weorked until I had 
to format, and taking advantage of ubuntu 9.4 I decided to keep the 
repositories of tfl). However, as I followed the steps, the 
./autogen.sh --prefix=/usr from atk gives some warnings (nathing important I 
think, couse afterwards it compilates and installs with no bigger problem), 
but at-spi refuses to compilate, giving several errors that I'm incapable of 
understanding.
This is my scrip of ./autogen.sh --prefix=/usr --libexecdir=/usr/lib/at-spi, 
and I'm using ubuntu 9.4:
Script iniciado (jue 28 may 2009 17:04:24 CLT
) ]0;mk360 SeventhSon: ~/sources/at-spi mk360 SeventhSon:~/sources/at-spi$ 
./autogen.sh --prefix=/usr --libexecdir=/usr/lib/at-spi
[1mchecking for autoconf >= 2.53...
[m (B  testing autoconf2.50... not found.
testing autoconf... found 2.63
[1mchecking for automake >= 1.9...
[m (B  testing automake-1.10... found 1.10.2
[1mchecking for libtool >= 1.5...
[m (B  testing libtoolize... found 2.2.6
[1mchecking for glib-gettext >= 2.2.0...
[m (B  testing glib-gettextize... found 2.20.1
[1mchecking for intltool >= 0.30...
[m (B  testing intltoolize... found 0.40.6
[1mchecking for pkg-config >= 0.14.0...
[m (B  testing pkg-config... found 0.22
[1mchecking for gtk-doc >= 1.0...
[m (B  testing gtkdocize... found 1.11
[1mChecking for required M4 macros...
[m (B [1mChecking for forbidden M4 macros...
[m (B [1mProcessing ./configure.in
[m (B [1mRunning libtoolize...
[m (Blibtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros 
in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
[1mRunning glib-gettextize... Ignore non-fatal messages.
[m (BCopying file mkinstalldirs
Copying file po/Makefile.in.in

Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from 
ftp://ftp.gnu.org/pub/gnu/config/.

[1mRunning intltoolize...
[m (B [1mRunning gtkdocize...
[m (B [1mRunning aclocal-1.10...
[m (Bconfigure.in:50: warning: macro `AM_GCONF_SOURCE_2' not found in 
library
[1mRunning autoconf...
[m (B [1mRunning autoheader...
[m (Bautoheader: WARNING: Using auxiliary files such as `acconfig.h', 
`config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for 
`config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template 
without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:         [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see 
the
autoheader: WARNING: documentation.
[1mRunning automake-1.10...
[m (Batk-bridge/Makefile.am:23: libbonobo-2: non-POSIX variable name
atk-bridge/Makefile.am:23: liboaf-2: non-POSIX variable name
atk-bridge/Makefile.am:23: libORBit-2: non-POSIX variable name
atk-bridge/Makefile.am:23: libat-spi: non-POSIX variable name
docs/reference/idl/Makefile.am:18: <D: non-POSIX variable name
docs/reference/idl/Makefile.am:26: <D: non-POSIX variable name
Makefile.am:13: GCONF_SCHEMAS_INSTALL does not appear in AM_CONDITIONAL
]0;mk360 SeventhSon: ~/sources/at-spi mk360 SeventhSon:~/sources/at-spi$ 
exit
exit

Regards,
mk.