Re: [orca-list] Successfully using gnome and orca

["Juan Hernandez" <juan netplus1 com>]

Well.

1.  I fully installed fc7 from the dvd provided off the speakupmodified
website
2.  I installed my synth, TTSynth
3.  I did orca -t to configure orca via console, and it successfully found
my synth, and went through the prompts for me.

I then tried to launch x and gnome, I typed at my prompt xinit

And I get nothing.  I get the following output, depending on when I use
startx or xinit I get different outputs.

Below are is my script session.

Thx.

(xion)-<~> ->xinit
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Fedora Core 7 Red Hat, Inc.
Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu Jun 14
05:35:26 UTC 2007 i686
Build Date: 11 June 2007
Build ID: xorg-x11-server 1.3.0.0-9.fc7 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:28:55 2007
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module already built-in
(II) Module already built-in

waiting for X server to shut down xterm:  fatal IO error 32 (Broken pipe) or
KillClient on X server ":0.0"
FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.


xinit:  unexpected signal 2.
(xion)-<~> ->
(xion)-<~> ->startx
xauth:  creating new authority file /root/.serverauth.30838

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Fedora Core 7 Red Hat, Inc.
Current Operating System: Linux xion 2.6.21-1.3228.fc7spk #1 SMP Thu Jun 14
05:35:26 UTC 2007 i686
Build Date: 11 June 2007
Build ID: xorg-x11-server 1.3.0.0-9.fc7 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 01:30:03 2007
(==) Using config file: "/etc/X11/xorg.conf"

(II) Module already built-in
(II) Module already built-in
localuser:root being added to access control list
v[0]='/usr/libexec/at-spi-registryd'
s='/usr/libexec/at-spi-registryd'
bar 1 '/usr/libexec/at-spi-registryd'
Xlib:  extension "XEVIE" missing on display ":0.0".

(gnome-session:30863): GLib-CRITICAL **: g_source_remove: assertion `tag >
0' failed
Bonobo accessibility support initialized
GTK Accessibility Module initialized
SESSION_MANAGER=local/xion:/tmp/.ICE-unix/30863
GTK Accessibility Module initialized
GTK Accessibility Module initialized
Bonobo accessibility support initialized
Bonobo accessibility support initialized
GTK Accessibility Module initialized
GTK Accessibility Module initialized
Bonobo accessibility support initialized
GTK Accessibility Module initialized
GTK Accessibility Module initialized
GTK Accessibility Module initialized
Bonobo accessibility support initialized
GTK Accessibility Module initialized
GTK Accessibility Module initialized
GTK Accessibility Module initialized
Bonobo accessibility support initialized
Bonobo accessibility support initialized
Bonobo accessibility support initialized
GTK Accessibility Module initialized
GTK Accessibility Module initialized

** (gnome-panel:30950): WARNING **: Failed to establish a connection with
GDM: No such file or directory
(II) Module already built-in

waiting for X server to shut down ....

xinit:  unexpected signal 2.
(xion)-<~> ->
 

-----Original Message-----
From: Scott Haeger [mailto:scott bashautomation com] 
Sent: Wednesday, July 25, 2007 11:14 AM
To: Juan Hernandez
Subject: Re: [orca-list] Successfully using gnome and orca

Juan Hernandez wrote:
> Hi guys, I just installed fedora 7 on to computers, a desktop and laptop.
>
> I cannot start xwindows+gnome+orca at all.
>
> Have you guys had any success with this?
>
> Please let me know, as I've been down for a day...
>  
>
> _______________________________________________
> Orca-list mailing list
> Orca-list gnome org
> http://mail.gnome.org/mailman/listinfo/orca-list
> Visit http://live.gnome.org/Orca for more information on Orca
>
>   
How far have you gotten on the installation? The first step is to get Gnome
running. That should be an easy install with FC7. We'll guide you from
there.

Scott