Re: QMI support in network-manager-applet

[dag dg <dagofthedofg gmail com>]

Maybe I missed something but I'm getting the same result:

http://pastebin.com/uccF5EJC

I downloaded the tarball at
http://cgit.freedesktop.org/ModemManager/ModemManager/commit/?h=aleksander/novatel-fixes&id=d169c99dc960f02233f65b2fcfb702b76814594f

got the driver setup:

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=819b Rev=00.00
S:  Manufacturer=Novatel Wireless, Inc.
S:  Product=Novatel Wireless HSPA
S:  SerialNumber=012773000168391
C:  #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=qmi_wwan
I:  If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=qmi_wwan


and reran

  463  ./autogen.sh --prefix=/usr --sysconfdir=/etc --localstatedir=/var
  464  make
  465  sudo make install


On Tue, May 7, 2013 at 5:12 PM, Dan Williams <dcbw redhat com> wrote:
> On Tue, 2013-05-07 at 16:50 -0500, dag dg wrote:
> > I'll run a test on this when I leave the office, which branch should I
> > be testing just to be safe?
> >
> > Thanks for all the help, exciting stuff.
>
> ModemManager git, aleksander/novatel-fixes branch.  It works both on my
> QMI-enabled E362, and my non-QMI XU-870.
>
> Dan
>
> > On Tue, May 7, 2013 at 4:27 PM, Dan Williams <dcbw redhat com> wrote:
> > > On Tue, 2013-05-07 at 09:13 +0200, Aleksander Morgado wrote:
> > > > On 06/05/13 23:38, dag dg wrote:
> > > > > Ok here's the output of modem manager in debug, I've removed all the
> > > > > novatel drivers and compiled them(Modem Manager, Network Manager,
> > > > > nm-applet) in the order that Dan recommended. The output is a bit
> > > > > lengthy so I've attached it as a text document.
> > > >
> > > > Are you able to test with the new "aleksander/novatel-fixes" branch from
> > > > git? The main problem was that the Novatel plugin didn't allow QMI
> > > > modems yet, it should allow them now.
> > > >
> > > > Dan, quick review of the branch?
> > >
> > > Branch looks good, merge it! :)
> > >
> > > Dan