Re: [MM] Disable SMS or disable use of second AT port

[Xavier Hervy <xhervy gds com>]

On 13/06/13 19:33, Dan Williams wrote:
> On Thu, 2013-06-13 at 16:56 +0100, Xavier Hervy wrote:
> > Hi,
> >
> > Is there a way to configure Modem Manager to either not retrieve SMS
> > automatically or to not use the second AT serial port (i.e just use the
> > broadband capability) ?
> > I have a custom board which is already retrieving the SMS independantly
> > from the computer. This is working fine until Modem Manager use the AT port.
> Possibly uninstalling or blacklisting the device is what you want to do
> if it's conflicting with your other stuff?
>
> Dan
Hi Dan,
I should have been more precise in my question.
I do use the data connection but I would like Modem Manager to not deal 
with the AT port.
lsusb:
Bus 002 Device 068: ID 05c6:9000 Qualcomm, Inc. SIMCom SIM5218 modem

When connected, 5 serial port through USB are created, one of them is 
the AT port that I need to keep free.
If I blacklist the device I won't have the data connection any more neither.
I am not very good with udev, is it possible to black list one specific 
port only ?
I could use wvdial instead, but network manager is so much cleaner .

Regards,
Xavier