Re: Can I configure a specified PEAP wireless in network-manager

[Frank <eular frank gmail com>]

On 09/20/2012 04:40 PM, Frank wrote:
> On 09/19/2012 12:12 AM, Dan Williams wrote:
> > then we need some
> > supplicant debug logging instead, which is roughly:
> >
> > 1) mv /usr/sbin/wpa_supplicant /
> > 2) killall -TERM wpa_supplicant
> > 3) /wpa_supplicant -dddtu
> > 4) retry the connection and let it fail
> > 5) grab the supplicant debug output (careful, may be sensitive info)
> >
> > But before you do that, NM logs the configuration its sending to the
> > supplicant to syslog, so try to match that up with what you have from
> > the plain wpa_supplicant config and see what  the differences are.  You
> > will see NM send "TKIP CCMP" instead of just "CCMP", but that is not
> > going to be the problem.
> I fetched a log and read it roughly, finding some differences. I 
> attached the part which I think is the most crucial. It seems that 
> "flush_object_timeout_handler" had been sent by the key should have 
> been attached, therefore no key was configured and the connection lost.
> > Does your network have *both* WPA-only and WPA2-only acess points with
> > the same SSID?
> There are many wireless access points with the same SSID, but they're 
> all WPA2.
> > Dan
> Best wishes. Thanks!
To my surprise, when I chose "PEAP version" from "Automatic" to "Version 
0", it connected! I think that there's some bug there.

Best wishes.