Re: Network Manager reason codes

[Jirka Klimes <jklimes redhat com>]

On Thursday 10 of February 2011 14:20:12 Byte Soup wrote:
> Hi All,
> 
> I was wondering about the reason codes Im seeing in my /var/log/syslog, for
> example:
> 
> Feb 10 13:15:57 Homer NetworkManager: <info>  (eth1): supplicant connection
> state:  associating -> disconnected
> Feb 10 13:15:59 Homer NetworkManager: <info>  (eth1): supplicant connection
> state:  disconnected -> scanning
> Feb 10 13:16:11 Homer NetworkManager: <info>  (eth1): supplicant connection
> state:  scanning -> disconnected
> Feb 10 13:16:13 Homer NetworkManager: <info>  (eth1): device state change:
> 8 -> 3 (reason 11)
> Feb 10 13:16:13 Homer NetworkManager: <info>  (eth1): deactivating device
> (reason: 11).
> 
> Is there a reference for the reason codes? Also Im working in a location
> where there are a number of different access points for the same network.
> Can I configure network manager to just associated to one MAC address,
> because it seems to be hopping from one to another and then subsequently my
> VPN connection drops
> 
> Thanks
> 
> -Mark

You can find the reason codes in
http://cgit.freedesktop.org/NetworkManager/NetworkManager/tree/include/NetworkManager.h?id=2dbaab2221c092e1cb1855b14419964b4b8a04fc#n235

If you want to use just one AP, you can "lock" a connection to it via BSSID 
field in nm-connection-editor.

right-click on nm-applet -> "Edit Connections..." ->click to "Wireless tab" -> 
find your connection -> click "Edit..." -> on "Wireless tab" add MAC address of 
your AP to BSSID edit field and save the connection.

Jirka