Re: NetworkManager not connects to my wireless network



Dan Williams wrote:
Jan  7 14:53:17 bumfi NetworkManager: <WARN>  connection_get_settings_cb(): connection_get_settings_cb: Invalid connection: 'NMSettingWireless' / 'bssid' invalid: 1

This seems to be an error in KNetworkManager, and it could be causing
the issues you describe...  It seems liek the issue is that after you
enter your network information, the GUI client doesnt' correctly send it
to NetworkManager.

Dan
  Thanks a lot for the hint.
I've switched to the gnome desktop and now my wireless network can be activated. Unfortunately, however, is still something wrong because although I set correctly my passphrase for WPA & WPA2 Personal, my wireless network remains unavailable,
  see the attached log-file of NetworkManager, for example.

  Andras
==== output of ifconfig =====

eth0      Link encap:Ethernet  HWaddr 00:17:31:CB:99:39  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:17 

eth1      Link encap:Ethernet  HWaddr 00:17:31:CB:87:52  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:23 Base address:0x8000 

eth2      Link encap:Ethernet  HWaddr 00:22:3F:15:1F:EA  
          inet addr:10.42.43.1  Bcast:10.42.43.255  Mask:255.255.255.0
          inet6 addr: fe80::222:3fff:fe15:1fea/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:297
          TX packets:16 errors:515 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:3138 (3.0 Kb)
          Interrupt:16 Base address:0x8000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1072 (1.0 Kb)  TX bytes:1072 (1.0 Kb)


====== /var/log/NetworkManager ======

Feb  2 19:33:31 bumfi NetworkManager: <info>  starting...
Feb  2 19:33:31 bumfi NetworkManager: <info>  Trying to start the modem-manager...
Feb  2 19:33:31 bumfi NetworkManager: <WARN>  nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():#012Sucess#012
Feb  2 19:33:31 bumfi NetworkManager: <info>  Found new Ethernet device 'eth1' (driver: 'forcedeth').
Feb  2 19:33:31 bumfi NetworkManager: <info>  (eth1): exported as /org/freedesktop/Hal/devices/net_00_17_31_cb_87_52
Feb  2 19:33:31 bumfi NetworkManager: <info>  Found new Ethernet device 'eth0' (driver: 'skge').
Feb  2 19:33:31 bumfi NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_17_31_cb_99_39
Feb  2 19:33:31 bumfi NetworkManager: <info>  (eth2): driver supports SSID scans (scan_capa 0x01).
Feb  2 19:33:31 bumfi NetworkManager: <info>  Found new 802.11 WiFi device 'eth2' (driver: 'wl').
Feb  2 19:33:31 bumfi NetworkManager: <info>  (eth2): exported as /org/freedesktop/Hal/devices/net_00_22_3f_15_1f_ea
Feb  2 19:33:31 bumfi NetworkManager: <info>  Trying to start the supplicant...
Feb  2 19:33:31 bumfi NetworkManager: <info>  modem manager appeared
Feb  2 19:33:31 bumfi NetworkManager: <info>  Trying to start the system settings daemon...
Feb  2 19:33:31 bumfi NetworkManager: <info>  (eth2): supplicant manager state:  down -> idle
Feb  2 19:33:31 bumfi nm-system-settings: Loaded plugin ifcfg-suse: (C) 2008 Novell, Inc.#011To report bugs please use the NetworkManager mailing list.
Feb  2 19:33:31 bumfi nm-system-settings: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Feb  2 19:33:33 bumfi NetworkManager: nm_device_ethernet_new: assertion `driver != NULL' failed
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth1): device state change: 1 -> 2 (reason 2)
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth1): bringing up device.
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth1): preparing device.
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth1): deactivating device (reason: 2).
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth0): bringing up device.
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth0): preparing device.
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth2): device state change: 1 -> 2 (reason 2)
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth2): preparing device.
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth2): deactivating device (reason: 2).
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth2): device state change: 2 -> 3 (reason 0)
Feb  2 19:33:36 bumfi NetworkManager: <info>  (eth2): supplicant interface state:  starting -> ready
Feb  2 19:39:59 bumfi NetworkManager: <WARN>  connection_get_settings_cb(): Couldn't retrieve connection settings: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken..
Feb  2 19:40:59 bumfi NetworkManager: connection_updated_cb: assertion `old_connection != NULL' failed
Feb  2 19:41:05 bumfi NetworkManager: <WARN>  wait_for_connection_expired(): Connection (2) /org/freedesktop/NetworkManagerSettings/0 failed to activate (timeout): (0) Connection was not provided by any settings service
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) starting connection 'BUMFINET-2400kHz'
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): device state change: 3 -> 4 (reason 0)
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 1 of 5 (Device Prepare) scheduled...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 1 of 5 (Device Prepare) started...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 2 of 5 (Device Configure) scheduled...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 1 of 5 (Device Prepare) complete.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 2 of 5 (Device Configure) starting...
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): device state change: 4 -> 5 (reason 0)
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2/wireless): access point 'BUMFINET-2400kHz' has security, but secrets are required.
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): device state change: 5 -> 6 (reason 0)
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 2 of 5 (Device Configure) complete.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 1 of 5 (Device Prepare) scheduled...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 1 of 5 (Device Prepare) started...
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): device state change: 6 -> 4 (reason 0)
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 2 of 5 (Device Configure) scheduled...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 1 of 5 (Device Prepare) complete.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 2 of 5 (Device Configure) starting...
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): device state change: 4 -> 5 (reason 0)
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2/wireless): connection 'BUMFINET-2400kHz' has security, and secrets exist.  No new secrets needed.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'ssid' value 'BUMFINET-2400kHz'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'mode' value '1'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'frequency' value '2412'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-NONE'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'proto' value 'WPA'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'pairwise' value 'NONE'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: added 'group' value 'TKIP'
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 2 of 5 (Device Configure) complete.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Config: set interface ap_scan to 2
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): supplicant connection state:  inactive -> scanning
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): supplicant connection state:  scanning -> associating
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): supplicant connection state:  associating -> completed
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'BUMFINET-2400kHz'.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 3 of 5 (IP Configure Start) scheduled.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 3 of 5 (IP Configure Start) started...
Feb  2 19:44:20 bumfi NetworkManager: <info>  (eth2): device state change: 5 -> 7 (reason 0)
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 4 of 5 (IP Configure Get) scheduled...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 3 of 5 (IP Configure Start) complete.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 4 of 5 (IP Configure Get) started...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 5 of 5 (IP Configure Commit) scheduled...
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 4 of 5 (IP Configure Get) complete.
Feb  2 19:44:20 bumfi NetworkManager: <info>  Activation (eth2) Stage 5 of 5 (IP Configure Commit) started...
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface eth2 --protocol tcp --destination-port 53 --jump ACCEPT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface eth2 --protocol udp --destination-port 53 --jump ACCEPT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface eth2 --protocol tcp --destination-port 67 --jump ACCEPT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface eth2 --protocol udp --destination-port 67 --jump ACCEPT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert FORWARD --in-interface eth2 --jump REJECT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert FORWARD --out-interface eth2 --jump REJECT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert FORWARD --in-interface eth2 --out-interface eth2 --jump ACCEPT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface eth2 --jump ACCEPT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface eth2 --match state --state ESTABLISHED,RELATED --jump ACCEPT
Feb  2 19:44:21 bumfi NetworkManager: <info>  Executing: /usr/sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 --destination ! 10.42.43.0/255.255.255.0 --jump MASQUERADE
Feb  2 19:44:21 bumfi NetworkManager: <info>  Starting dnsmasq...
Feb  2 19:44:21 bumfi NetworkManager: <debug> [1265136261.667210] nm_dnsmasq_manager_start(): Command line: /usr/sbin/dnsmasq --no-hosts --keep-in-foreground --bind-interfaces --no-poll --except-interface=lo --listen-address=10.42.43.1 --dhcp-range=10.42.43.10,10.42.43.100,60m --dhcp-option=option:router,10.42.43.1 --dhcp-lease-max=50 --pid-file=/var/run/nm-dnsmasq-eth2.pid
Feb  2 19:44:21 bumfi NetworkManager: <debug> [1265136261.676927] nm_dnsmasq_manager_start(): dnsmasq started with pid 3592
Feb  2 19:44:21 bumfi NetworkManager: <info>  (eth2): device state change: 7 -> 8 (reason 0)
Feb  2 19:44:21 bumfi NetworkManager: <info>  Activation (eth2) successful, device activated.
Feb  2 19:44:21 bumfi NetworkManager: <info>  Activation (eth2) Stage 5 of 5 (IP Configure Commit) complete.
Feb  2 19:44:21 bumfi NetworkManager: <info>  (eth2): supplicant connection state:  completed -> associated
Feb  2 19:44:21 bumfi NetworkManager: <info>  (eth2): supplicant connection state:  associated -> completed
Feb  2 19:44:21 bumfi nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/autofs' exited with error status 1.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]