[Fwd: Re: Timeschedule of 0.7 release and possible sponsoring]

[dragoran <drago01 gmail com>]

please write to the list to not only to me ;)

--- Begin Message ---

• From: Aaron Konstam <akonstam sbcglobal net>
• To: dragoran <drago01 gmail com>
• Subject: Re: Timeschedule of 0.7 release and possible sponsoring
• Date: Tue, 11 Sep 2007 09:00:09 -0500

On Tue, 2007-09-11 at 15:46 +0200, dragoran wrote:
> >
> > Today i'm at the university that uses these settings in wpa_supplicant:
> >
> > network={
> >         ssid="university"
> >         scan_ssid=1
> >         key_mgmt=IEEE8021X
> >         eap=PEAP
> >         phase2="auth=MSCHAPV2"
> >         identity="account university tld <mailto:account university tld>"
> >         password="password"
> > }
> >
> > I tried connecting to the network with NetworkManager 0.6.5 in Ubuntu
> > Gutsy and i couldn't get a connection. Networkmanager just kept on
> > circling without returning any green bulbs (in the applet). I've
> > selected LEAP, filled in my username and password and then chose
> > IEEE802.1.x. I also tried WPA-EAP, but that didn't work too.
> >
> > If it's true that this type of connection is supported by NetworkManager
> > 0.6.5, then what am i doing wrong?
> >
> You have to select WPA ENTERPRISE than PEAP , Dynamic WEP and MSCHAPV2 
> than it should work. Its not a LEAP network.
> 
I agree that should work. But at our university that has AP connections
using both LEAP and PEAP the PEAP connection when chosen just opened the
correct dialog for configuring the connection , while the LEAP did not.
--
=======================================================================
My darling wife was always glum. I drowned her in a cask of rum, And so
made sure that she would stay In better spirits night and day.
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam sbcglobal net

--- End Message ---