Connected wireless once using WPA, cannot connect again

["Michael Schwager" <mschwage gmail com>]

Hi,
I'm running Kubuntu Edgy and I have gotten my Thinkpad T60 up and
running using KNetworkManager.  Versions:
uname -a : Linux rodin 2.6.17-10-386 #2 Fri Oct 13 18:41:40 UTC 2006
i686 GNU/Linux
wpa_supplicant: 0.5.4
network-manager: 0.6.3-2ubuntu6

Network card is an Intel 3945abg.  I'm using WPA-PSK, TKIP algorithm.

After getting it working, I rebooted into Windows.  (don't ask me
why... :-).  Used Windows for a coupla weeks, then went back to
Ubuntu.  Wireless network no longer works.  Here's some segments from
the log file.  I don't know what may have changed, because I don't
know what I could have done to change it... ;-\  Appreciate any help,
thanks.

(in this log info, I have removed all the "Network Manger:
<information> "'s from the begnning of each line, for brevity)
NetworkManager: <debug info>  [1168191524.059790]
nm_device_802_11_wireless_get_activation_ap (): Forcing AP 'Mike y
Bovi'
User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / Mike y Bovi
Deactivating device eth1.
Device eth1 activation scheduled...
Activation (eth1) started...
Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Activation (eth1/wireless): access point 'Mike y Bovi' is encrypted,
and a key exists.  No new key needed.
SUP: sending command 'INTERFACE_ADD eth1       wext
/var/run/wpa_supplicant '
SUP: response was 'OK'
SUP: sending command 'AP_SCAN 2'
... (bunch of successful "SUP"'s removed)...
SUP: sending command 'ENABLE_NETWORK 0'
SUP: response was 'OK'
Activation (eth1) Stage 2 of 5 (Device Configure) complete.
wpa_supplicant(7855): total 0
wpa_supplicant(7855): Global control interface '/var/run/wpa_supplicant-global'
wpa_supplicant(7855): RX global ctrl_iface - hexdump_ascii(len=49):
...(hex dump not included as I don't know if there's a password in there)...
wpa_supplicant(7855): CTRL_IFACE GLOBAL INTERFACE_ADD 'eth1
wext    /var/run/wpa_supplicant '
wpa_supplicant(7855): Initializing interface 'eth1' conf 'N/A' driver
'wext' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
wpa_supplicant(7855): Initializing interface (2) 'eth1'
wpa_supplicant(7855): EAPOL: SUPP_PAE entering state DISCONNECTED
wpa_supplicant(7855): EAPOL: KEY_RX entering state NO_KEY_RECEIVE
wpa_supplicant(7855): EAPOL: SUPP_BE entering state INITIALIZE
wpa_supplicant(7855): EAP: EAP entering state DISABLED
wpa_supplicant(7855): EAPOL: External notification - portEnabled=0
wpa_supplicant(7855): EAPOL: External notification - portValid=0
wpa_supplicant(7855): SIOCGIWRANGE: WE(compiled)=20 WE(source)=16 enc_capa=0xf
wpa_supplicant(7855):   capabilities: key_mgmt 0xf enc 0xf
wpa_supplicant(7855): WEXT: Operstate: linkmode=1, operstate=5
wpa_supplicant(7855): 4
wpa_supplicant(7855): wpa_driver_wext_set_wpa
wpa_supplicant(7855): wpa_driver_wext_set_key: alg=0 key_idx=0
set_tx=0 seq_len=0 key_len=0
wpa_supplicant(7855): wpa_driver_wext_set_key: alg=0 key_idx=1
set_tx=0 seq_len=0 key_len=0
wpa_supplicant(7855): wpa_driver_wext_set_key: alg=0 key_idx=2
set_tx=0 seq_len=0 key_len=0
wpa_supplicant(7855): wpa_driver_wext_set_key: alg=0 key_idx=3
set_tx=0 seq_len=0 key_len=0
wpa_supplicant(7855): wpa_driver_wext_set_countermeasures
wpa_supplicant(7855): wpa_driver_wext_set_drop_unencrypted
wpa_supplicant(7855): Setting scan request: 0 sec 100000 usec
wpa_supplicant(7855): Using existing control interface directory.
wpa_supplicant(7855): Added interface eth1
wpa_supplicant(7855): Wireless event: cmd=0x8b06 len=8
wpa_supplicant(7855): RX ctrl_iface - hexdump_ascii(len=9):
wpa_supplicant(7855):      41 50 5f 53 43 41 4e 20 32
     AP_SCAN 2
wpa_supplicant(7855): RX ctrl_iface - hexdump_ascii(len=11):
wpa_supplicant(7855):      41 44 44 5f 4e 45 54 57 4f 52 4b
     ADD_NETWORK
wpa_supplicant(7855): CTRL_IFACE: ADD_NETWORK
wpa_supplicant(7855): RX ctrl_iface - hexdump_ascii(len=41): [REMOVED]
wpa_supplicant(7855): CTRL_IFACE: SET_NETWORK id=0 name='ssid'
wpa_supplicant(7855): CTRL_IFACE: value - hexdump_ascii(len=22): [REMOVED]
wpa_supplicant(7855): ssid - hexdump_ascii(len=11):
wpa_supplicant(7855):      4d 69 6b 65 20 79 20 42 6f 76 69
     Mike y Bovi
wpa_supplicant(7855): hexdump_ascii(len=25): [REMOVED]
....(bunch of CTRL_IFACE's removed for brevity)...
wpa_supplicant(7855): Setting scan request: 0 sec 0 usec
wpa_supplicant(7855): State: DISCONNECTED -> SCANNING
wpa_supplicant(7855): Trying to associate with SSID 'Mike y Bovi'
wpa_supplicant(7855): Cancelling scan request
wpa_supplicant(7855): WPA: clearing own WPA/RSN IE
wpa_supplicant(7855): Automatic auth_alg selection: 0x1
wpa_supplicant(7855): n info
wpa_supplicant(7855): WPA: Set cipher suites based on configuration
wpa_supplicant(7855): WPA: Selected cipher suites: group 30 pairwise
24 key_mgmt 2
wpa_supplicant(7855): WPA: clearing AP WPA IE
wpa_supplicant(7855): WPA: clearing AP RSN IE
wpa_supplicant(7855): WPA: using GTK CCMP
wpa_supplicant(7855): WPA: using PTK CCMP
wpa_supplicant(7855): WPA: using KEY_MGMT WPA-PSK
wpa_supplicant(7855): WPA: Set own WPA IE default - hexdump(len=24):
dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2
02
wpa_supplicant(7855): No keys have been configured - skip key clearing
wpa_supplicant(7855): wpa_driver_wext_set_drop_unencrypted
wpa_supplicant(7855): State: SCANNING -> ASSOCIATING
wpa_supplicant(7855): WEXT: Operstate: linkmode=-1, operstate=5
wpa_supplicant(7855): wpa_driver_wext_associate
wpa_supplicant(7855): Setting authentication timeout: 60 sec 0 usec
wpa_supplicant(7855): EAPOL: External notification - EAP success=0
wpa_supplicant(7855): EAPOL: External notification - EAP fail=0
wpa_supplicant(7855): EAPOL: External notification - portControl=Auto
wpa_supplicant(7855): Wireless event: cmd=0x8b06 len=8
wpa_supplicant(7855): Wireless event: cmd=0x8b1a len=20
wpa_supplicant(7855): CTRL_IFACE monitor attached - hexdump(len=41):
2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72
2f 77 70 61 5f 63 74 72 6c 5f 37 35 35 39 2d 31 30 00
wpa_supplicant(7855): Wireless event: cmd=0x8b06 len=8
wpa_supplicant(7855): Wireless event: cmd=0x8b1a len=20
Activation (eth1/wireless): association took too long (>120s), failing
activation.
Activation (eth1) failure scheduled...
Activation (eth1) failed for access point (Mike y Bovi)
Activation (eth1) failed.
Deactivating device eth1.




--
-Mike Schwager