nm & orinoco_pci troubles
- From: Torgeir Veimo <torgeir pobox com>
- To: networkmanager-list gnome org
- Subject: nm & orinoco_pci troubles
- Date: Tue, 07 Feb 2006 00:08:23 +1000
I have to rmmod and modprobe the orinoco_pci module after networkmanager
is started for it to recognize the card. But it doesn't work. I get the
log below; Anyone got an idea for what's wrong?
[root atlantis src]# NetworkManager --no-daemon
NetworkManager: <information> starting...
NetworkManager: <information> Adding VPN service
'org.freedesktop.NetworkManager.vpnc' with name 'vpnc' and program
'/usr/bin/nm-vpnc-service'
NetworkManager: <information> Deactivating device dev19667.
NetworkManager: <information> eth0: Device is fully-supported using
driver 'e100'.
NetworkManager: <information> nm_device_init(): waiting for device's
worker thread to start
NetworkManager: <information> nm_device_init(): device's worker thread
started, continuing.
NetworkManager: <information> Now managing wired Ethernet (802.3)
device 'eth0'.
NetworkManager: <information> Deactivating device eth0.
NetworkManager: <information> Updating allowed wireless network lists.
NetworkManager: <WARNING> nm_dbus_get_networks_cb ():
nm-dbus-nmi.c:527 (nm_dbus_get_networks_cb): error received:
org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless
networks stored..
NetworkManager: <debug info> [1139234646.091740] nm_hal_device_added
(): New device added (hal udi is
'/org/freedesktop/Hal/devices/net_00_05_3c_07_cc_0d_0').
NetworkManager: <information> eth1: Device is fully-supported using
driver 'orinoco_pci'.
NetworkManager: <information> nm_device_init(): waiting for device's
worker thread to start
NetworkManager: <information> nm_device_init(): device's worker thread
started, continuing.
NetworkManager: <information> Now managing wireless (802.11) device
'eth1'.
NetworkManager: <information> Deactivating device eth1.
NetworkManager: <WARNING> get_scan_results ():
get_scan_results(): card took too much time scanning. Get a better one.
NetworkManager: <WARNING> nm_device_802_11_wireless_scan ():
nm_device_wireless_scan(eth1): get_scan_results() returned an error.
NetworkManager: <debug info> [1139234697.265209]
nm_device_802_11_wireless_get_activation_ap (): Forcing AP 'ToRgEiR'
NetworkManager: <information> User
Switch: /org/freedesktop/NetworkManager/Devices/eth1 / ToRgEiR
NetworkManager: <information> Deactivating device eth1.
NetworkManager: <information> Activated the DHCP daemon /sbin/dhcdbd
with PID 21945.
NetworkManager: <information> Device eth1 activation scheduled...
NetworkManager: <information> Activation (eth1) started...
NetworkManager: <information> Activation (eth1) Stage 1 (Device
Prepare) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 (Device
Prepare) started...
NetworkManager: <information> Activation (eth1) Stage 2 (Device
Configure) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 (Device
Prepare) complete.
NetworkManager: <information> Activation (eth1) Stage 2 (Device
Configure) starting...
NetworkManager: <information> Activation (eth1/wireless): access point
'ToRgEiR' is encrypted, but NO valid key exists. New key needed.
NetworkManager: <information> Activation (eth1) New wireless user key
requested for network 'ToRgEiR'.
NetworkManager: <information> Activation (eth1) Stage 2 (Device
Configure) complete.
NetworkManager: <information> Activation (eth1) New wireless user key
for network 'ToRgEiR' received.
NetworkManager: <information> Activation (eth1) Stage 1 (Device
Prepare) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 (Device
Prepare) started...
NetworkManager: <information> Activation (eth1) Stage 2 (Device
Configure) scheduled...
NetworkManager: <information> Activation (eth1) Stage 1 (Device
Prepare) complete.
NetworkManager: <information> Activation (eth1) Stage 2 (Device
Configure) starting...
NetworkManager: <information> Activation (eth1/wireless): access point
'ToRgEiR' is encrypted, and a key exists. No new key needed.
NetworkManager: <information> SUP: sending command 'INTERFACE_ADD eth1
wext /var/run/wpa_supplicant '
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not
supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not
supported
WEXT auth param 5 value 0x1 - NetworkManager: <information> SUP:
response was 'OK'
NetworkManager: <information> SUP: sending command 'AP_SCAN 2'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'ADD_NETWORK'
NetworkManager: <information> SUP: response was '0
'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid
546f5267456952'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0
key_mgmt NONE'
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0
wep_key0 316e326d337a37783863397630'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'SET_NETWORK 0
wep_tx_keyidx 0'
NetworkManager: <information> SUP: response was 'OK'
NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0'
NetworkManager: <information> SUP: response was 'OK'
Trying to associate with SSID 'ToRgEiR'
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 6 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not
supported
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - ioctl[SIOCSIWGENIE]: Operation not
supported
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 0 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not
supported
WEXT auth param 1 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not
supported
WEXT auth param 2 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not
supported
WEXT auth param 3 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not
supported
WEXT auth param 10 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not
supported
WEXT auth param 8 value 0x1 - Association request to the driver failed
NetworkManager: <information> Activation (eth1) Stage 2 (Device
Configure) complete.
No network configuration found for the current AP
ioctl[SIOCSIWMLME]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Invalid argument
NetworkManager: <information> Activation (eth1/wireless): association
took too long (>20s), failing activation.
NetworkManager: <information> Activation (eth1) failure scheduled...
NetworkManager: <information> Activation (eth1) failed for access
point (ToRgEiR)
NetworkManager: <information> Activation (eth1) failed.
NetworkManager: <information> Deactivating device eth1.
CTRL-EVENT-TERMINATING - signal 15 received
ioctl[SIOCSIWMLME]: Operation not supported
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not
supported
--
Torgeir Veimo <torgeir pobox com>
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]