Re: [GnomeMeeting-list] phonedev module

[Damien Sandras <dsandras seconix com>]

Le jeu 06/03/2003 à 12:06, George a écrit :
> Thanks for the help Damien,
> 
> I made a bad assumption that the IP translation in gnomemeeting would
> take care of the masquerading on the network for pc to phone. I opened
> the ports on the router and now pc to phone works as expected. 

Actually you even have to forward the ports to your internal machine.

> 
> I'm not familiar with gdb, but I think I figured out how to run
> gnomemeeting in it. However, it doesn't produce a backtrace:
> 
> (gdb) run gnomemeeting
> Starting program: /usr/bin/gnomemeeting gnomemeeting
> Segmentation fault
> 
> This is all the output I get.
> 

When you get that, just type "bt"
It will print the backtrace.


> Please let me know if you need more info.
> 

Do you have time to debug it now?
> Thanks
> 
> 
> > Hi,
> > 
> > Having a segfault is obviously not normal and it is the first report of
> > that kind that I get.
> > 
> > I suggest you to :
> > - run gnomemeeting in gdb and send me the backtrace by mail (not to the
> > list)
> > - check that your installation is correct, I suppose that you compiled
> > GnomeMeeting yourself. Make sure that there were no old OpenH323
> > libraries or headers on your system.
> > 
> > The fact that you didn't hear your correspondant indicates firewall
> > problems. Are you sure that you have forwarded all required ports ?
> > Have you tested normal calls (not PC-To-Phone) ?
> > 
> > Btw, Tunneling and Fast Start are required for MicroTelco to work.
> > 
> > Le jeu 06/03/2003 à 07:57, George a écrit :
> > > As a follow up, this behaviour is the same with the ixj and nixj
> > > drivers.
> > > 
> > > 
> > >  
> > > >  I downloaded and compiled the nixj drivers. The ixj and phonedev modules
> > > >  load fine now. However, when I start gnomemeeting after entering my
> > > >  microtelco information, gnomemeeting gives a segfault. If I clear the
> > > >  error window, gnomemeeting seems to still work ok. If I remove my
> > > >  microtelco information, gnomemeeting doesn't give the segfault anymore.
> > > >  
> > > >  When gnomemeeting gives the segfault, it doesn't produce a backtrace.
> > > >  
> > > >  When I try to use pc to phone, the other party can hear me but I cannot
> > > >  hear them (except for one call only).
> > > >  
> > > >  System set up:
> > > >  
> > > >  RedHat 7.3 / Ximain Gnome 2
> > > >  Kernel 2.4.18-10
> > > >  nixj drivers
> > > >  gnomemeeting 0.96
> > > >  internet Phonejack card
> > > >  IP translation enabled in gnomemeeting
> > > >  Tried with and without fast start and tunneling enabled
> > > >  
> > > >  Can someone please help me to resolve these problems. Since purchasing
> > > >  the internet Phonejack card and the microtelco account, I would REALLY
> > > >  like to get this working.
> > > >  
> > > >  Thanks in advance,
> > > >  
> > > >  
-- 
 _	Damien Sandras
(o-	GnomeMeeting: http://www.gnomemeeting.org/
//\	FOSDEM 2003:  http://www.fosdem.org
v_/_	H.323 phone:  callto://ils.seconix.com/dsandras seconix com