gdm - server crash - more info

I am running RedHat 7.0 linux 2.2.16-22 one HP Vectra VL with Intel P

When I allow gdm to start from /etc/inittab it crash and I get following

Fatal server error:
Server is already active for display 0
        If this server is no longer running, remove /tmp/.X0-lock
        and start again.

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

If I instead start gdm manualy with the command /usr/bin/gdm -nodaemon,
I get following log:

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
      GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
      gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
      sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300,
      sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110,
      i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "se"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Matrox|MGA 2064W [Millennium]"
(**) SVGA: Monitor ID: "HP D2807A Ergo Ultra VGA 1280 17-inch Display"
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/TrueType" does not
         Entry deleted from font path.
(**) FontPath set to "unix/:7100"
(--) SVGA: PCI: Matrox MGA 2064W rev 1, Memory @ 0x40200000, 0x40800000
(--) SVGA: Linear framebuffer at 0x40800000
(--) SVGA: MMIO registers at 0x40200000
(--) SVGA: Video BIOS info block at 0x000c7b13
(--) SVGA: chipset:  mga2064w
(--) SVGA: videoram: 8192k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 220.000 MHz
(**) SVGA: Mode "800x600": mode clock =  60.750
(**) SVGA: Mode "1024x768": mode clock =  98.900
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: MCLK set to 50.000 MHz
(--) SVGA: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext,
TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
(--) SVGA: XAA: Dashed lines and segments

Gdk-CRITICAL **: file gdkfont.c: line 303 (gdk_string_width): assertion
`font != NULL' failed.

Gdk-CRITICAL **: file gdkfont.c: line 380 (gdk_text_width_wc): assertion
`font != NULL' failed.

Jon Ingason
Unix system administrator
Global One Services AB

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]