Sound problems

["Joseph McDevitt" <jmcdevitt snet net>]

Hello,

I'm having a lot of trouble getting sound to work.  I'm using Redhat 5.2 and
I've upgraded to linux 2.2.7 and gnome 1.0

I have a Creative/Ensoniq AudioPCI sound card and I'm using es1370.  When I
first tried out the card with a music CD, there did not appear to be any
problems and I was getting sound from enlightenment.  As soon as I started
the sound equalizer app, the CD sound stopped although desktop sounds could
still be played.  The CD applet display indicated that it was in fact
playing the CD, just no sound.  I also had esd running, at least there was a
socket in /tmp/.esd.

I'm going to attach a bunch of stuff that I hope will be useful to someone
who can help me out.  Does anyone know of any options that can be used with
this card?

Thanks much, in advance.

Joe

/etc/conf.modules:

alias scsi_hostadapter aha152x
alias sound es1370

output of /sbin/lsmod:

Module                  Size  Used by
es1370                 20900   1
soundcore               2208   4  [es1370]


/var/log/dmesg:

Linux version 2.2.7 (root@www.snet.net) (gcc version 2.7.2.3) #1 Sun Jun 6
11:54:18 EDT 1999
Detected 400912060 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 399.77 BogoMIPS
Memory: 62928k/65472k available (1136k kernel code, 412k reserved, 908k
data, 88k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf0550
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Initializing RT netlink socket
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
pm2fb: pm2pci_detect: scanning PCI bus for known chipsets...
pm2fb: pm2pci_detect: no PCI board found.
pm2fb: pm2fb_conf: no board found.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DHEA-38451, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-6202B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DHEA-38451, 8063MB w/472kB Cache, CHS=1027/255/63, UDMA
hdb: Disabling (U)DMA for WDC AC32500H
hdb: DMA disabled
hdb: WDC AC32500H, 2441MB w/128kB Cache, CHS=620/128/63
hdc: ATAPI 32X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled,
parity=enabled, synchronous=disabled, delay=100, extended
translation=disabled
aha152x: trying software interrupt, ok.
scsi0: Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi: 1 host.
  Vendor: iomega    Model: jaz 1GB           Rev: J.86
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 4, lun 0
  Vendor: IOMEGA    Model: ZIP 100           Rev: J.03
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi removable disk sdb at scsi0, channel 0, id 5, lun 0
scsi: detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2091050 [1021 MB] [1.0 GB]
sda: Write Protect is off
sdb: READ CAPACITY failed.
sdb: status = 0, message = 00, host = 0, driver = 28
sdb: extended sense code = 2
sdb: block size assumed to be 512 bytes, disk size 1GB.
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
 sda: sda4
 sdb:scsidisk I/O error: dev 08:10, sector 0
 unable to read partition table
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda3
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 88k freed
Adding Swap: 128988k swap-space (priority -1)
es1370: version v0.20 time 12:01:19 Jun  6 1999
es1370: found adapter at io 0xd000 irq 5
es1370: features: joystick off, line in, mic impedance 0