Re: Sound problems



I just picked up a new SB 16 PCI which I guess is the Creative/Esoniq
es1371. The first thing I had to do was delete the lines for my old card
from /etc/conf.modules. Then, during boot, there were errors reported in
the /etc/isapnp.conf file - so I renamed it to isapnp.conf.bak.

I rebooted (concerned about the errors during the last boot) and ran
sndconfig. No errors - seems to work. Though I question it's
capabilities and configuration. I think I should have hunted around for
a normal old ISA SB 16. Here's some output for comparison...

p/o /proc/pci
  Bus  0, device  15, function  0:
    Multimedia audio controller: Ensoniq Unknown device (rev 6).
      Vendor id=1274. Device id=1371.
      Slow devsel.  IRQ 18.  Master Capable.  Latency=96.  Min
Gnt=12.Max Lat=128.
      I/O at 0x1800 [0x1801].

p/o /etc/conf.modules
alias sound es1371
(no mpu? isn't mpu-401 the midi device?)

dmesg...
es1371: version v0.11 time 16:29:38 May 23 1999
es1371: found adapter at io 0x1800 irq 18
es1371: features: joystick 0x0
es1371: codec vendor TRA revision 3
es1371: codec features none
es1371: stereo enhancement: no 3D stereo enhancement
es1371: dma timed out??
es1371: dma timed out??
es1371: dma timed out??
es1371: dma timed out??
es1371: dma timed out??

(dma timed out confuses me)

I'm running kernel 2.2.7 on RH5.2.


-- 
Kevin der Kinderen



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]