Hi!
I've installed GNOME but I can't make it work properly.
The version I've installed isn't the last one, as I've grabbed the RPMs from a CD of a magazine to save some download time. I'm using Red Hat 5.2 distribution. The version of the main packages were: - gnome-core 1.0.1 - gnome-libs 1.0.1 - gtk+ 1.2.0 I installed the packages from the Red Hat CD mentioned in the
getting started page
(gsl, guile, xscreensaver) and then installed all the RPMs. The only required package missing was enlightenment, so I downloaded version 0.15.5 (along with enlightenment-conf) and installed both RPMs as well. Then I wrote a .Xclients file in my home
directory:
----------------------
#!/bin/bash exec gnome-session
## End File
---------------------- When I run startx, the desktop appears, as well as the panel.
The panel
and the main menu work fine but any window opened, gets docked to the top-left corner and I can't move or resize them. Besides, every windows shows no title bar. Here is the output from startx (if it helps)
------------------------
XFree86 Version 3.3.2.3 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: July 15 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.0.34 i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200, ct64300, generic (using VT number 7) XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "us(pc101)" (**) XKB: geometry: "pc" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "es" (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) SVGA: Graphics device ID: "ViRGE/DX or /GX" (**) SVGA: Monitor ID: "Generic Monitor" (--) SVGA: Mode "640x400" needs vert refresh rate of 69.93 Hz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted. (--) SVGA: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode "320x200" needs vert refresh rate of 69.93 Hz. Deleted. (--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted. (--) SVGA: Invalid vertical timing for mode "400x300". Deleted. (--) SVGA: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted. (--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted. (--) SVGA: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted. (--) SVGA: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted. (--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted. (--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted. Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (--) SVGA: PCI: S3 ViRGE/DX or /GX rev 1, Memory @ 0xe0000000 (--) SVGA: S3V: ViRGE/DXGX rev 1, Linear FB @ 0xe0000000 (--) SVGA: Detected S3 ViRGE/DXGX (--) SVGA: using driver for chipset "s3_virge" (--) SVGA: videoram: 2048k (--) SVGA: Ramdac speed: 170 MHz (--) SVGA: Detected current MCLK value of 50.114 MHz (--) SVGA: chipset: s3_virge (--) SVGA: videoram: 2048k (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 170.000 MHz (**) SVGA: Mode "640x480": mode clock = 25.175 (--) SVGA: Virtual resolution set to 640x480 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: s3_virge: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 pattern fill (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext, TE/NonTE polytext) (--) SVGA: XAA: Using 5 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and non-transparent stipples (--) SVGA: XAA: Horizontal and vertical lines and segments SESSION_MANAGER=local/derquinse.rew:/tmp/.ICE-unix/395,tcp/derquinse.rew:1024 Priority 00: Starting Id = 11c6440001000092446082900000003650000 Priority 00 : Registering Id = 11c6440001000092446082900000003650000 Priority 20 : Starting Id = 11c6440001000092446086100000003650006 Priority 20 : Starting Id = 11c6440001000092446083000000003650001 Priority 20 : Starting Id = 11c6440001000092446086100000003650004 Priority 20 : Starting Id = 11c6440001000092446086000000003650003 Priority 20 : Starting Id = 11c6440001000092446086100000003650005 Priority 20 : Starting Id = 11c6440001000092446086000000003650002 Priority 20 : Registering Id = 11c6440001000092446083000000003650001 Priority 20 : Registering Id = 11c6440001000092446086100000003650006 Priority 20 : Registering Id = 11c6440001000092446086000000003650003 Priority 20 : Registering Id = 11c6440001000092446086100000003650005 Priority 20 : Registering Id = 11c6440001000092446086100000003650004 Priority 20 : Registering Id = 11c6440001000092446086000000003650002 Priority 40 : Starting Id = 11c6440001000092446086200000003650007 Gdk-Message: Got event for unknown window: 0 SetKbdSettings - type: 2 rate: 5 delay: 500 snumlk:
0
SetKbdSettings - Succeeded - disabling startup beeps xscreensaver-command: no screensaver is running on display :0.0 xscreensaver: disabling server builtin screensaver. You can re-enable it with "xset s on". Priority 40 : Registering Id = 11c6440001000092446086200000003650007 Priority 50 : Starting Id = 11c6440001000092459352300000004710000 Priority 50 : Registering Id = 11c6440001000092459352300000004710000 SOCKET XID: 14000A3
register ext: 80C4640
register ext->info: 80DD788 add callback ext: 80C4640 the appwidget 80DE328 Saving to [/panel.d/Session-a00414/] Saving session: 1 2 3 4 Saving to [/panel.d/Session-b00414/] Saving session: 1 2 3 4 received signal 15: terminating... waiting for X server to shut down bye
bye.
initializing... ------------------------
Any idea of what I'm doing wrong? I've looked at the user's
guide and the
FAQ and have found no solution. Thanks
|